Computer Accessories

• Brand: COOLER MASTER
• Part Number: CL-W507-PL12SW-A
• Type: AIO Liquid Cooler
• Display: 3.95" TFT LCD
• Model #: CL-W507-PL12SW-A

• Type: CPU Block
• Color: Black
• Model #: B-HTJV2-L16-BK

• Type: CPU Block
• Model #: B-3090TC-X-NE

• Type: CPU Block
• Model #: CP-PARX-X-CT50-100-BK

• Type: CPU Block
• Model #: 6932167224453

(7)

• Type: CPU Water Block
• Block Compatibility: Intel: LGA 2066 / 2011-3 / 2011 / 1700 / 1366 / 1200 / 1156 / 1155 / 1151 / 1150 / 775 AMD: AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2 / FM1
• Block Dim.: 93.4 (L) x 93.4 (W) x 22 (H) mm
• Block Material: Copper + PMMA
• Model #: CL-W279-CU00SW-A

• Brand: Thermal Grizzly
• Model: 4260711990755
• Part Number: TG-DDM-i13G
• Color: Black
• Model #: 4260711990755

Limited time offer, ends 07/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 1.0mm
• Dimensions: 20mm x 20mm x 1.0mm
• Model #: 11-001-272

• Model #: 552614544963

Limited time offer, ends 07/31

• Model #: 11-001-330

• Type: Liquid Cooling System
• Block Dim.: 89 x 91 x 101 mm
• Block Material: Copper
• Radiator Size: 399.5 x 120 x 30 mm
• Model #: ASUS ROG RYUJIN III 360

• Brand: Thermal Grizzly
• Model: TG-AD-AM5-MK
• Part Number: TG-AD-AM5-MK
• Color: Black
• Model #:

• Model #: XB0CKXCP1LW

• Model #: ROG RYUO IV 360 ARGB White

• Model #: 9158154835663

(126)

• Type: Liquid Cooling System
• Block Compatibility: AMD Socket AM2 / AMD Socket AM2+ / AMD Socket AM3 / AMD Socket AM4 / AMD Socket AM5 / AMD Socket FM1 / AMD Socket FM2 / Intel LGA 1150 / Intel LGA 1151 / Intel LGA 1155 / Intel LGA 1156 / Intel LGA 1366 / Intel LGA 1700 / Intel LGA 2011 / Intel LGA 2011-v3 / Intel LGA 2066
• Block Compatibility - Intel: LGA 2066, LGA2011-3, LGA2011, LGA1366, LGA 1700/1200/1156/1155/1151/1150
• Block Material: Copper
• Model #: CL-W319-PL12BL-B

(126)

• Type: Liquid Cooling System
• Block Compatibility: Intel LGA 2066 / 2011-3 / 2011 / 1700 / 1366 / 1200 / 1156 / 1155 / 1151 / 1150 AMD AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2 / FM1
• Block Compatibility - Intel: Intel LGA 2066 / 2011-3 / 2011 / 1700 / 1366 / 1200 / 1156 / 1155 / 1151 / 1150
• Block Material: Copper
• Model #: CL-W319-PL12TQ-A

• Type: CPU Block
• Model #: 6932167210012

• Type: CPU Water Cooling
• LED: Addressable RGB
• Model #: GD-CHIONE M4-360

• Type: CPU Block
• Model #: 6932167210807

Limited time offer, ends 07/31

• Brand: EN-Labs
• Model #: 36WPCICON5D

• Type: CPU Block
• Model #: RMSX14CK-SW

• Model #: B252

• Type: CPU Block
• Color: Frosted
• Model #: RT14MA-430-F

• Type: Case Fan
• Model #: tt-1225

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. Just peel and stick. Reduce the risk of hardware failure due to overheating. Installation Instructions: Make sure the chip modules are free from dirt and grease. Peel the protective liner off on the base of the heatsink. Apply the heatsinks to the corresponding chip modules and apply firm pressure. Package Includes: 1x 14mmx14mmx7.5mm Aluminum Heatsink for Raspberry pi 2B CPU chipset 1x 8.8mmx8.8mmx5mm Aluminum Heatsink for Raspberry pi 2B LAN chipset
• Dimensions: 1x 14mmx14mmx7.5mm CPU chipset 1x 8.8mmx8.8mmx5mm LAN chipset
• Model #: 11-001-200

Limited time offer, ends 07/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,Computer VGA Northbridge Southbridge etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Use Screw to install the heatsink. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 35mm x 35mm x 10mm Weight: 35g Package Content: 2pcs x Heatsink
• Dimensions: 35mm x 35mm x 10mm
• Model #: 11-001-262

• Type: CPU Block
• Color: Yellow
• Model #: PFLEXA10-34-PUY

• Type: CPU Block
• Model #: 6932167222794

• Type: CPU Block
• Model #: 6932167225511

• Fan Size: 120mm
• Series: N/A
• Type: CPU Water Cooling
• RPM: 800-2150 RPM±10%
• Model #: GL360-RGB Black

• Model #: LP3200 LIQ CLR

Limited time offer, ends 07/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
• Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
• Model #: 11-001-328

Limited time offer, ends 07/31

• Model #: 11-001-235

Limited time offer, ends 07/31

• Type: Fan splitter cable
• Length: 6 inches
• Connector Number: 3
• Model #: 121014