Specifications: Average Particle Size:
< 0.49 micron < 0.000020 inch
Extended Temperature Limits:
Peak: -50 Celsius Degree to >180 Celsius Degree
Long-Term: -50 Celsius Degree to 130 Celsius Degree
Performance:
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area:
A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches.
Features: GC-4 comes with the enhanced micron-particle synthetic thermal filler and polyer matrix to ensure ultimate conductivity, perfect gap filling and optimal viscosity. It is also non-electrical conductive and included an additional applicator for super easy application.
Specifications: Average Particle Size:
< 0.49 micron < 0.000020 inch
Extended Temperature Limits:
Peak: -50 Celsius Degree to >180 Celsius Degree
Long-Term: -50 Celsius Degree to 130 Celsius Degree
Performance:
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area:
A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches.
Specifications: TG-50 adopts a composite formula of nano carbon tubes and liquid metal, with a thermal conductivity exceeding 18.2W/mK (measured value), which can quickly reduce the temperature difference between CPU/GPU cores by more than 25 ℃,. Its non-conductive properties eliminate the risk of short circuits, with good viscosity optimization. Single point/nine
Long Term Operating Temperature: -150 °C / +200 °C
Specifications: Even though the amount of metallic elements in Aeronauts formula is lower in comparison to our other products, it still provides reliable and perfomant thermal conductivity.
In our lab tests, Aeronaut showed a high amount of wear resistance under high temperatures, and acts also surface-protecting. The removal of Aeronaut thermal grease causes far less micro scratches on the components surface compared to other products.
Specifications: TG-30 adopts an improved nanocarbon tube composite formula with a thermal conductivity of 17.5W/mK (measured value), which can quickly reduce the temperature difference between CPU/GPU cores and meet the cooling needs of mainstream gaming consoles, high-performance graphics cards, and workstations. Its non-conductive properties completely avoid the risk of short circuit,
Specifications: TG-30 adopts an improved nanocarbon tube composite formula with a thermal conductivity of 17.5W/mK (measured value), which can quickly reduce the temperature difference between CPU/GPU cores and meet the cooling needs of mainstream gaming consoles, high-performance graphics cards, and workstations. Its non-conductive properties completely avoid the risk of short circuit,