Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk
CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic
at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the
Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc
Package included:
10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 0.6mm
Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...