Wired & Wireless Accessories

• Brand: TRENDnet
• Part Number: TI-BE200
• Type: PoE Extender
• Specifications: Standards IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af IEEE 802.3at IEEE 802.3bt Standard Interface 1 x Gigabit PoE++ in port 1 x Gigabit PoE++ out port 1 x Gigabit PoE+ out port LED indicators Wall mount IP67 housing Data transfer rate Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex) Performance RAM buffer: 1Mb MAC Address Table: 2K entries Jumbo Frame: 9KB Certifications CE FCC IEC 61000-4-2 IEC 61000-4-4 IEC 61000-4-5 IEC 60068-2-27 (Shock) IEC 60068-2-32 (Free Fall) IEC 60068-2-6 (Vibration)
• Model #: TI-BE200

• Type: PoE Extender
• Color: Black
• Specifications: Network Connector: PoE In Port 1 x 10/100/1000BASE-T Ethernet with Ultra PoE "Data + DC" in, auto MDI / MDI-X, auto-negotiation RJ45 connector PoE Out Port 4 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/802.3af PoE "Data + DC" out, auto MDI / MDI-X, auto-negotiation RJ45 connector Data Rate: 10/100/1000 Mbps Switch Architecture: Store-and-Forward MAC Address Table: 2K Data Buffer: 2 Mbits Switch Fabric: 10 Gbps Switch Throughput: 7.44 Mpps @ 64 bytes Jumbo Frame: 9K Flow Control: IEEE 802.3x pause frame for full duplex Back pressure for half duplex LED Indicators: PoE In Port 10/100 LNK / ACT (Orange), 1000 LNK / ACT (Green) PoE Out Port 1 to Port 4 10/100 LNK / ACT (Orange), 1000 LNK / ACT (Green) PoE-in-Use (Orange) PoE Max. (Orange) Protection: ESD (Ethernet): 6 KV Surge (EFT for powe...
• Model #: POE-E304

• Type: PoE Extender
• Color: Black
• Specifications: Ethernet Interface: LRP-101UH Copper: 10/100BASE-TX RJ45, auto-negotiation / auto-MDI / MDI-X Power over Ethernet Standard: IEEE 802.3at/af PoE PD (Powered Device) PoE Input: Supports both mid-span and end-span PSE Input Range: 48~56V DC Data Rate: 100/100 Mbps Cabling: Cat5e or above Maximum Distance: 100m Maximum Frame Size: 1522 bytes LRP-101UE Copper: 10/100BASE-TX RJ45, auto-negotiation / auto-MDI / MDI-X Power over Ethernet Standard: IEEE 802.3at/af PoE PSE (Power Source Equipment) PoE Output: 48~56V DC, 600mA max. PoE Budget: Up to 25 watts PoE Mode: End-span, RJ45 Pin 1/2 (+), 3/6 (-) Data Rate: 100/100 Mbps Cabling: Cat5e or above Maximum Distance: 100m Maximum Frame Size: 1522 bytes LED Indicators: LRP-101UH 4 x LEDs PWR LRP LNK PoE IN LNK / ACT LRP-101UE 4 x LEDs PWR LRP LNK PoE-in-u...
• Model #: LRP-101U-KIT

• Type: PoE Injector
• Color: Black
• Specifications: Interface: LAN: 1 x RJ-45 STP, "Data" Input Port POE: 1 x RJ-45 STP, "Data + Power" Output Port AC Connector: 1 x AC Input power socket, IEC-320 C6 Network Cable: Ultra PoE (60W): 4-pair UTP Cat. 5, 5e, 6 up to 100m (328 ft.) 802.3af / at PoE(15W / 30W): 2-pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) LED Indicator: System: Power x 1 (Green) PoE Port: Active, PoE ready / In Use x 1 (Green) Data Rate: 10/100/1000 Mbps Unit Output Voltage: DC 50-57V, 1.2A Power Requirements: 100-240V AC @ 50/60 Hz, 1.5A max. Power Consumption: 60 watts max. PoE Standard: Ultra PoE over 4-pairs UTP, High Power over Ethernet End-Span / Mid-Span PSE PoE Power Supply Type: End-Span + Mid-Span Power Pin Assignment: Pair 1 End-Span: 1/2 (+), 3/6 (-) Pair 2 Mid-Span: 4/5 (+), 7/8 (-) PoE Power Output: DC 50-57V/60-w...
• Model #: POE-173

• Type: PoE Extender
• Specifications: PoE Standard: IEEE 802.3af (Power over Ethernet) IEEE 802.3at (High Power over Ethernet) PoE Power Supply Type: Mid-Span / Type B PoE Power Output: 52V DC, 510 mA, Max. 26 watts Power Pin Assignment: 4/5 (+), 7/8 (-) Maximum Distance: 4 units, daisy-chain installation with 500m support Data Rate: 10/100/1000 Mbps Switch Architecture: Store-and-Forward Maximum Frame Size: 1552 Bytes Flow Control: Back pressure for half-duplex IEEE 802.3x pause frame for full-duplex LED Indicators: 1 x PoE IN (Green) 1 x LAN Data (Green) 1 x PoE OUT (Green) Power Requirements: IEEE 802.3at compliant with voltage within 52V-56V DC Power Consumption: 3.2 watts (system maximum)
• Model #: POE-E201

• Type: PoE Extender
• Color: Black
• Specifications: Ethernet Interface: Copper: 10/100BASE-TX RJ45 auto-negotiation / auto-MDI / MDI-X Power over Ethernet Standard: IEEE 802.3at/af PoE PSE (Power Source Equipment) PoE Output: 56V DC, 600mA max. PoE Budget: Up to 25 watts PoE Mode: End-span, RJ45 Pin 1/2 (+), 3/6 (-) Data Rate: 100/100 Mbps Cabling: Cat5e or above Maximum Distance: 100 meters Maximum Frame Size: 1522 bytes LED Indicators: 4 x LEDs PWR LRP LNK PoE-in-use LNK / ACT ESD Protection: 4KV DC Enclosure: Metal case Installation: Wall mount or DIN rail with optional kit Power Requirements: BNC Power over Coaxial Input: 44~56V DC Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af Power over Ethernet (802.3at Type 1) IEEE 802.3at Power over Ethernet Plus(802.3at Type 2)
• Model #: LRP-101CE

• Type: PoE Splitter
• Color: Black
• Specifications: Interface: "PoE (Power + Data)" Input Port : 1 x RJ-45 10/100/1000Base-T "Data" Out Port: 1 x RJ-45 10/100/1000Base-T DC Out Plug Connector: 1 removable 4-Pin terminal block LED Indicator: System: Power Ready x 1 (Green) Network Cable: 10/100/1000Base-T: 4-Pair UTP Cat. 5, 5e, 6 Distance up to 100m (328 ft.) EIA/TIA- 568 100-ohm STP (100m) Data Rate: 10/100/1000 Mbps (vary on Ethernet device attached) DIP Switch: 12V DC / 24V DC output voltage Power Input: 802.3at PoE 48~56V DC Power Output: 12V / 24V DC, max 2A (adjustable) Enclosure: IP30 metal case Installation: DIN rail kit and wall mount ear ESD / EFT Protection: 6 KV DC PoE Standard: IEEE 802.3at High Power over Ethernet Number of devices that can be powered: 1 or 2 (Vary on device's power requirement; DC1 + DC2 cannot be over 25 watts.) ...
• Model #: IPOE-162S

• Brand: TRENDnet
• Part Number: TI-IG290
• Type: PoE Injector
• Specifications: Standards IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3af IEEE 802.3at IEEE 802.3bt IEEE 802.3bz Device Interface 2 x 2.5GBASE-T ports 2 x 2.5GBASE-T PoE++ ports 4-pin removable terminal block LED indicators DIN-Rail mount Wall mount Grounding point Data Transfer Rate Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex) 2.5 Gigabit: 5000Mbps (full duplex) Terminal Block Redundant power inputs, 4 pin Wire range: 0.34mm^2 to 2.5mm^2 Solid wire (AWG): 12-24/14-22 Stranded wire (AWG): 12-24/14-22 Torque: 5 lb. – In / 0.5Nm / 0.56 Nm Wire strip length: 7-8mm MTBF 716,685 hours Housing IP30 metal case DIN-rail mount Wall mount Grounding poi...
• Model #: TI-IG290

• Type: Device Server
• Color: Black
• Specifications: xDirect PoE Single Port RS232/422/485 10/100 Device Server w/o Power Supply Serial Connectors: Single-port: DB9F (RS232/RS422/RS485, DCE Pinned) Ethernet Interface: 10/100M RJ-45 Serial Interface Baud Rate: 300bps to 921.6 Kbps LED Indicators: Power/Status, Link, Activity, Serial RX Activity & TX Activity CPU: Based on DSTni-EX Enhanced 16-bit x86 Architecture Memory: 256 KB SRAM, 1 MB Flash *No Power Supply
• Model #: XDT10P0-01-S

• Model #: 9391048903929

• Type: PoE Splitter
• Color: Black
• Specifications: Standards: IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af Device Interface: 1 x Gigabit data/power in port 1 x Gigabit data out port 1 x Power out port LED indicators Adjustable output power DIP switch (5 V, 7.5 V, 9 V, 12 V) Data Transfer Rate: Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Gigabit: 2000 Mbps (full duplex) Jumper Cable: 2.0 to 2.0 mm 2.0 to 2.5 mm Power: PoE network cable input: 48 V DC, 0.38 A Output: 5 V (2 A), 7.5 V (2 A), 9 V (1.7 A), 12 V (1.2 A) Consumption: 0.3 Watts (max.)
• Model #: TPE-104GS

• Type: PoE Injector
• Color: White
• Specifications: Hardware Version: version 2 Interface: "Data" Input Port:1 x RJ-45 STP "PoE (Data+Power)" Output Port:1 x RJ-45 STP DC 56V Input Power Socket:1 LED Indicator: System: Power x 1 (Green) PoE Port: PoE in Use x 1 (Green) Network Cable: 10Base-T: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) 100Base-TX: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) 1000Base-T: 2-Pair UTP Cat. 5, 5e, 6 up to 100m (328 ft.) EIA/TIA- 568 100-ohm STP (100m) Data Rate: 10/100/1000 Mbps Unit Input Voltage: DC 56V, 0.53A Power Requirements: 100-240V AC, 50/60 Hz Power Consumption: 30 watts (max). Number of devices can be powered: 1 Standards Compliance: IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3at High Power over Ethernet
• Model #: POE-161

• Model #: BEUACC-PoE+-2.5G

• Model #: 9359014210464

• Type: PoE Injector
• Specifications: Interface: "Data" Input Ports: 16 x RJ45 "Data + Power" Output Ports: 16 x RJ45 Management Port: 1 x RJ45; 10/100/1000BASE-T, auto-negotiation, auto-MDI/MDIX Data Rate: 10/100/1000Mbps LED System: SYS PWR x 1 (Green), PoE Failure x 1 (Red), Fan Failure x 2 (Red) Management port x 2: 1000 (Green), 10/100(Orange) Per PoE Port: Ultra 60W PoE-in-use x 1 (Green), 802.3at/af PoE-in-use x1 (Orange), PoE Power Usage LED x4 (Green) Power Requirements: 100 - 240V AC, 50/60 Hz, 8A Power Consumption: 800 watts (max.) / 2729BTU Ventilation: Fan x 3 Enclosure: Metal PoE Standard: IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus 4-pair Ultra PoE PoE Power Supply Type: End-span / Mid-span / UPoE (Ultra PoE) Power Pin Assignment: Pair 1 end-span: 1/2(-), 3/6(+) Pair 2 mid-span: 4/5(+), 7/8(-) UPoE: 1/2(-), 3/6(+),...
• Model #: UPOE-1600G

• Brand: TRENDnet
• Part Number: TI-E100
• Type: PoE Extender
• Color: Black
• Model #: TI-E100

• Type: PoE Extender
• Specifications: Power consumption: 1.3 watts via POE Forwarded PoE Power: Up to 75 watts depending on standard Maximum current 0.7 amps on data pairs Maximum current 1.5 amps on spare pairs PoE Standards: IEEE 802.3af POE (15W) and IEEE 802.3at at POE Plus (2-event signature) (25-30W) IEEE 802.3bt POE (to 75W) Custom POE (incl. "always-on 48V" and "4-pair" POE) Ethernet Interface: Two independently auto-configuring 10/100 ports (10Base-T / 100Base-TX, half / full duplex) Patch or crossover cables supported LEDs Status indicators: Green LED - shows POE Power good Yellow LED - shows Ethernet link / activity Dimensions: 1.22" x 8.27" x 1.97" Weight: 0.23 lb. Mounting: 2/4 Bolt 7mm mounting holes. On 50/60mm centres Operating temperature: -40 degree C to 70 degree C [-40 degree F to 158 degree F] Relative humidity: Up to 85%, non-condensi...
• Model #: VOR-ORM-XT

• Type: PoE Repeater
• Color: Black
• Specifications: Standards: IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af IEEE 802.3at Device Interface: 1 x Gigabit PoE/PoE+ in port 1 x Gigabit PoE/PoE+ out port 1 x Power port (optional power adapter is not included) LED indicators Installation mounting points Data Transfer Rate: Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Gigabit: 2000 Mbps (full duplex) Power: Powered by PoE/PoE+ Device Consumption: 2 Watts (max.)
• Model #: TPE-E100

• Type: PoE Extender
• Model #: 508957

• Model #: STARWELL257710951904Lan

• Brand: TRENDnet
• Type: PoE Injector
• Color: Black
• Features: Converts a non-PoE port to a PoE+ 2.5G port Supplies PoE (15.4W), or PoE+ (30W) 2.5GBASE-T compliant Integrated power supply Network a PoE device up to 100m (328 ft.) Save on installation and equipment costs IEEE 802.3af and 802.3at compliant Package Contents: 2.5G PoE+ Injector Quick Installation Guide Power cord
• Model #: TPE-215GI

• Model #: R107239503388548

• Type: PoE Splitter
• Color: White
• Specifications: Interface: PoE (Power + Data) Input Port: 1 x RJ-45 STP Data” Output Port: 1 x RJ-45 STP DC Out Plug Connector: 1 LED Indicator System: PoE In x 1 (Green) Network Cable: 10Base-T: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) 100Base-TX: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) 1000Base-T: 2-Pair UTP Cat. 5, 5e, 6 up to 100m (328 ft.) EIA / TIA-568 100-ohm STP (100m) Data Rate: 10/100/1000 Mbps (varies on Ethernet device attached) DIP Switch: 12V DC / 24V DC output voltage Power Input: 802.3at PoE+ 52 ~ 56V DC PoE Standard: IEEE 802.3at High Power over Ethernet Number of clients device can be powered: 1 Power Output: 12V DC, 2A max 24V DC, 1A max Standards Compliance: IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3at...
• Model #: POE-162S

• Switch Type: other
• Format: Desktop
• Primary Ports: 5 x RJ45
• Primary Port Speed: 10/100Mbps
• Model #: LBS005A

• Type: PoE Injector
• Specifications: Design Product colour: Black, Gray LED indicators: Data, PoE, Power Networking Ethernet interface type: Gigabit Ethernet Ethernet LAN data rates: 10,100,1000 Mbit/s Cable types supported: Cat5, Cat5e Networking standards: IEEE 802.3,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3at,IEEE 802.3bt,IEEE 802.3u Ports & interfaces Ethernet LAN (RJ-45) ports: 2 Power AC adapter frequency: 50 - 60 Hz AC adapter input voltage: 100 - 240 V Total Power over Ethernet (PoE) budget: 95 W
• Model #: 561495-UK

• Brand: TRENDnet
• Part Number: TI-BEP200
• Type: PoE Extender
• Specifications: Standards IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af IEEE 802.3at IEEE 802.3bt Device Interface 1 x Gigabit PoE++ in port 1 x Gigabit PoE+ out port 1 x Gigabit 24/48V DC passive PoE out port LED indicators Wall mount IP67 housing Data Transfer Rate Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex) Performance RAM buffer: 1Mb MAC Address Table: 2K entries Jumbo Frame: 9KB DIP Switch Adjust 24/48V DC passive voltage (default 48V DC)
• Model #: TI-BEP200

• Model #: 993471438154

• Model #: 9359014209567

• Type: PoE Injector
• Color: Black
• Specifications: Hardware Version: 2 Interface: "Data" Input Ports: 4 x RJ-45 "Data+Power" Output Ports: 4 x RJ-45 Data Rate: 10/100/1000 Mbps LED: System: Power x 1 (Green) Per PoE Port: PoE ready / in-use x 4 (Green) Network Cable: 10Base-T: 4-Pair UTP Cat. 5 up to 100m (328 ft.) 100Base-TX: 4-Pair UTP Cat. 5 up to 100m (328 ft.) 1000Base-T: 4-Pair UTP Cat. 5e, 6, up to 100m (328 ft.) EIA/TIA- 568 100-ohm STP (100m, 328 ft.) Power Requirements: DC 52V~56V PoE Power Supply Type: Mid-Span PoE Power Output: Per Port DC 52V 30.8 watts / 15.4 watts Power Pin Assignment: 4/5(+), 7/8(-) PoE Power Budget: 120 watts Number of 802.3af PD Class 0, 1, 2, 3 can be powered: 4 Number of 802.3at PD Class 1, 2, 3 can be powered: 4 Number of 802.3at PD Class 0, 4 can be powered: 4 Standards Compliance: IEEE 802.3 10Bas...
• Model #: HPOE-460

• Type: Adapter
• Color: Black
• Model #: MC110CS

(53)

• Type: PoE Injector
• Color: Black
• Specifications: Interface: 2 x 10/100/1000Mbps RJ45 Port, AUTO Negotiation/AUTO MDI/MDIX 1 x 48VDC POWER INPUT PORT Network Media 10BASE-T: UTP category 3, 4, 5 cable (Max 100m) EIA/TIA-568 100O STP (Max 100m) 100BASE-TX: UTP category 5, 5e cable (Max 100m) EIA/TIA-568 100O STP (Max 100m) 1000BASE-T: UTP category 5, 5e, 6 cable (Max 100m) Basic Function: Compatible With IEEE 802.3af Compliant PDs Delivers Power Up To 100 Meters Auto-Determine The Necessary Power Requirements Dimensions: 3.2" x 2.1" x 0.9" LED Indicator: PWR Power Supply: 15.4W (Max. 48VDC) Certification: FCC, CE, RoHS System Requirements: Microsoft Windows 98SE, NT, 2000, XP, Vista or Windows 7, MAC OS, NetWare, UNIX or Linux. Environment Operating Temperature: 0°C - 40°C (32°F - 104°F) Storage Temperature: -40°C - 70°C (-40°F - 158°F) O...
• Model #: TL-PoE150S

• Model #: 694782039732

• Color: Black
• Weight: 0.6000
• Model #: ED-582

• Type: PoE Injector
• Color: Black
• Specifications: Standards - IEEE 802.3 - IEEE 802.3u - IEEE 802.3ab - IEEE 802.3af - IEEE 802.3at - IEEE 802.3bt Device Interface - 1 x Gigabit port - 1 x 4PPoE Gigabit port - 4-pin removable terminal block - LED indicators - DIN-Rail mount - Wall mount - Grounding point Power - Input: 52 - 56 V DC - Compatible power supply: TI-S12048 (sold separately) - Max. consumption (PoE): 72W Operating Temperature: - 40° - 75° C (-40° - 167° F) Operating Humidity: Max. 95 % non-condensing Dimensions (L x W x H): 104 x 82 x 32mm (4.10" x 3.20" x 1.20") Weight: 154g (5.4 oz.)
• Model #: TI-IG90

Limited time offer, ends 02/18

• Model #: bx-1350

• Model #: 9435761094745