Specifications: Supports any computer cases with an available 3.5" drive bay (both screw-on type or tool-less type)
Converts an available 3.5" HDD bay drive to accommodate two 2.5" HDD or SSD (Solid State Drive)
Constructed from robust SECC steel to ensure maximum structural integrity.
Specifications: Convert any 2 2.5" Hardrive into a 3.5" drive bay
Compatible with all types of 2.5" hard drive. Including SSD DRIVES!!!
Quick and easy installation
For use in 3.5" internal drive bay
Screw pack included to mount the drives
Specifications: Drive Connectors: 1 x SATA Data & Power Combo (7+15 pin)
Host Connectors: 1 x SATA Data & Power Combo (7+15 pin)
Dimensions: 1.40" x 4.00" x 5.70"
Weight: 9.20 oz.
Mobile Rack Drives Support: Multi 2.5" Drives to 3.5" Bay
Mobile Rack Interface: SATA I/II
Specifications: Product name: DataPort 25 SATA 6G
Host (I/O) Ports: (1) SATA: up to 6 Gbps
Drive Types Supported:
SATA 2.5" drives
SATA SSD (solid state drives)
SATA Speed: 6G
Insertion Rating: up to 30,000 carrier insertions
Number of bays: 2
Number of LEDs: 2
Description of LEDs: Power, drive activity
Construction material(s): Rugged all-metal construction
Dimensions: 6.10" x 4.02" x 1.02" (155mm x 102mm x 26mm)
Weight: 0.90 lbs. (0.41 kg)
Compliancy: FCC, CE, RoHS
Mobile Rack Drives Support: Multi 2.5" Drives to 3.5" Bay
Mobile Rack Interface: SATA I/II/III
Specifications: Color: Matt Black Host Interface: 7 pin SATA x 2 Drive Fit: 2.5" SATA I/II/III SSD or HDD (9.5mm thickness) Drive Bay: 3.5" floppy drive bay Transfer Rate: Up to 6 Gb/sec. (depending on hard drive speed) Insert& Extract connection Via: Direct hard drive SATA connection Structure: Full Metal Device Power: 15 pin SATA power x 1 Drive Cooling: Airflow vents with metal heat dissipation Power Indicator: Solid Green LED (Power On) HDD Access Indicator: Flashing Amber LED Dimension (L x W x H): 133 x 101.2 x 25.4mm
Specifications: 4Kn Support: Yes
General Specifications: Not compatible with M.2 SATA or AHCI based SSDs
Maximum Data Transfer Rate: 10 Gbps
MTBF: 233,398 Hours
TRIM Support: Yes
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s
NVMe (PCIe Gen 3)
UASP Support: Yes
Host Connectors:
1 - M.2 (PCIe, M-Key, NVMe, NGFF)
1 - USB 3.1 USB Type C (10 pin, Gen 2, 10 Gbps) Female
Dimension: 4.30" x 1.60" x 0.50"
Weight: 2.30 oz.
Mobile Rack Drives Support: 1 x 3.5" Drives to 5.25" Bay
Mobile Rack Interface: SATA I/II
Specifications: Hard Drive Compatibility: 3.5-Inch SATA/300(SATA II) or SATA/150 (SATA I) Hard Drives
System Requirements: PC or Mac with a 5.25 Inch Drive Bay
Drive Drawer Dimensions: 7.5" x 5.8" x 1.6"
Cooling Fan: Ball-Bearing Fan
Fan Dimensions: 40 x 40 x 10mm
Fan Enclosure: Plastic
Drive Drawer Enclosure: Aluminum
Drive Size: Supports up to 750Gb hard drive
Note: Unit is model specific and is not meant for use with different models of drive drawer unless otherwise stated
Specifications: Drive Connectors: 1 - M.2 (NGFF) Receptacle
Host Connectors: 1 - SATA Data & Power Combo (7+15 pin) Receptacle
Maximum Data Transfer Rate: 6 Gbps
Type and Rate: SATA III (6 Gbps)
Mobile Rack Drives Support: Multi 2.5" Drives to 5.25" Bay
Mobile Rack Interface: SATA I/II/III
Specifications: Host Interface: 7 pin SATA x 4
Drive Fit: 2.5" SATA I / II / III SSD or hard drive x 4
Drive Bay: Single 5.25" half height device bay
Transfer Rate: Up to 6 Gb / sec. (depending on hard drive speed)
Insert& Extract connection Via: Direct SATA hard drive connection
Structure: SECC
Device Power: Single 4 pin Molex power
Drive Cooling:
Dual 40mm rear cooling fan + fan power switch
Metal heat dispersion
Power Indicator: Solid Green LED
HDD Access Indicator: Flashing Amber LED
Dimension (L x W x H): 6.70" x 5.75" x 1.63"
Weight: 1.77 lbs.
Specifications: Color: Black
Plug & Play
Support Hot-Swap, RAID 0 / 1 / 5 / 10
All Aluminum Design with Conductive Dissipation Grooves
Power Control w/Molex 4pins or SATA 15pins connector, Sensor & Alarm
The Safety Tri-angle Lock Safeguards the Hard Drives
Super Air Ventilation & Heat Sink with 80mm Fan
Balance Handle - No Skew In/Out
Capacity Up To 1TG (1HD), 4TG (4HD)
Data Transfer Rate up to 3G(SATA) / 6G (SAS)
7D SATA Data Cable Included
RoHS ready
Specifications: Drive Connectors: 1 - 29 pin SAS SFF-8482 Female Female
Host Connectors: 1 - 22 pin SATA DATA and Power Combo Male Male
1.70" x 7.10" x 5.70"
14.10 oz.