BEST SELLERS

In HDD / SSD Accessories

Fits what it says it fits.

After reading the comments here about the bottom-mounting capability of this bracket, I decided to give it a try. It works perfectly with my Antec P160's removable drive trays. It even support 2 drives if I ever decide to get another SSD in the future.

Good Quality HD Case, perfect to protect your 2.5" external drives.

Small form factor SATA and SAS compatible Durable construction

These thermal pads are the same as you would get with any NVMe enclosure. They are thermally stackable. I had a gap issue with a NVMe enclosure that I had purchased a while ago. The pad that came with the enclosure wasn't thick enough. The NVMe SSD. would get so hot I needed to open the enclosure to cool it down to complete the transfer. I found these pads on Newegg and for the price I figured I'd give it a try. The gap was so wide I had to stack 2 on top of the existing pad to make contact with the enclosures heat sink. I tried a similar sized transfer. No more issues with the NVMe getting too hot and the transfer went strait through. I'm glad I took a chance. Now I don't need to replace the enclosure. If you do find that you need to stack 2 or more thermal pad, make sure there are no air bubbles trapped between them.

Nothing to it, just plug it in.

Fits flush in one of the 5 and 1/4 slots in the top of the CM 690 II Advanced. Receives plenty of rushing incoming air thanks to the exhaust fans at the rear top of the case - to keep the two 2.5 inch SSDs and the 3.5 inch device (dual USB 2.0 & 3.0 port adaptor) nice and chill. More durable plastic than I originally thought it would be.

stiff. strong. screws down.

Solid works as expected Bought on sale for $40

Its not as flimsy as others have said. Its not made of metal. It is plastic and if you are going to be hard on it, it will probably break. WD Red SSDs fit great in it. No alignment issues and no drives going missing

I thought this is the only 12Gbps hot-swap hard drive module I could found. Built a file server and like to try SSD drives for maximizing data transfering speed. This module’s performance is pretty impressive for me! The 12Gbps mini-SAS HD is awesome!

Does what it says, and works for what I need it to do which is holding my seagate XT in my case's drive bay.

work real good gives more drive space

I like how easy it was to slide the drive into the slot, and it clicks into place. It's just as easy to remove it from the sleeve.

They are soft inside to protect hard disks.

Works great, accepted our Intel 510 SSDs with no problems. Works with our LSI 6285-8i. Well engineered, nothing felt flimsy or of poor quality.

Good price. Fast shipping. Great name brand. Quick communication on entire process. Arrived on time well packaged. Easy install. Using 6 500GB SSDs in Raid 5 for archived video for easy removal. Labeled each disk for replacement. Being in an area with frequent evacuations, portability is important. Exactly what I wanted. Very fast.

Holds two drives.

Silverstone quality. Nice finish. Comes with screws. Holes line up perfectly with SSD and with the case drive bays.

Fantastic product, built with quality in mind, and easy to use.