DIY Cooling

• Model #: DEETB0CWQ8SDHN

• Model #: 14711

• Type: CPU Block
• Model #: CPU-4677-SR

• Type: CPU Block
• Model #: 1025050

Limited time offer, ends 09/30

• Type: Fan splitter cable
• Length: 6 inches
• Connector Number: 3
• Model #: 121014

(4)

• Type: CPU Block
• Block Compatibility: Intel LGA: 2011/1366/1155/1156/1150 AMD: FM2/FM1/AM3+/AM3/AM2+/AM2
• Block Dim.: 1.11" x 3.50" x 3.57"
• Block Material: Copper
• Model #: CL-W027-CU00BL-A

• Type: CPU Block
• Model #: 6932167224668

• Model #: 1-Com-Cooler1776

• Model #: 1-CaseFans0759

• Type: CPU Block
• Model #: A-RX7900XTX-X

• Type: CPU Block
• Model #: N-GV4080SGMOC-X

• Type: AIO
• Model #: VK-AIOJR360B

(7)

• Type: CPU Water Block
• Block Compatibility: Intel: LGA 2066 / 2011-3 / 2011 / 1700 / 1366 / 1200 / 1156 / 1155 / 1151 / 1150 / 775 AMD: AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2 / FM1
• Block Dim.: 93.4 (L) x 93.4 (W) x 22 (H) mm
• Block Material: Copper + PMMA
• Model #: CL-W279-CU00SW-A

• Model #: 1-Water-Cooling1535

• Type: CPU Block
• Model #: GBN-AS4090TUFOG

Limited time offer, ends 09/30

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. Just peel and stick. Reduce the risk of hardware failure due to overheating. Installation Instructions: Make sure the chip modules are free from dirt and grease. Peel the protective liner off on the base of the heatsink. Apply the heatsinks to the corresponding chip modules and apply firm pressure. Package Includes: 1x 14mmx14mmx7.5mm Aluminum Heatsink for Raspberry pi 2B CPU chipset 1x 8.8mmx8.8mmx5mm Aluminum Heatsink for Raspberry pi 2B LAN chipset
• Dimensions: 1x 14mmx14mmx7.5mm CPU chipset 1x 8.8mmx8.8mmx5mm LAN chipset
• Model #: 11-001-200

• Type: CPU Block
• Model #: CP-D3PB-X

Limited time offer, ends 09/30

• Model #: 11-001-255(2)

• Model #: 1-Com-Cooler1920

• Type: CPU Block
• Model #: B-DTH-K40-V5

• Type: CPU Block
• Model #: B-PCI-EM-X-V2

• Brand: Alphacool
• Part Number: 1024103
• Type: Liquid Cooling System
• Block Material: Copper
• Model #: 1024103

• Type: CPU Block
• Model #: PC-ESK

Limited time offer, ends 09/30

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 0.5mm
• Dimensions: 20mm x 20mm x 0.5mm
• Model #: 11-001-270

Limited time offer, ends 09/30

• Model #: 11-001-236

• Brand: Watercool
• Model: WAT-0033
• Part Number: WAT-0033
• Color: Black
• Model #: WAT-0033

• Type: CPU Block
• Model #: 6932167222374

Limited time offer, ends 09/30

• Model #: 11-001-330

Limited time offer, ends 09/30

• Color: silver
• Compatibility: CPU
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
• Model #: 11-001-255(10)

• Type: CPU Block
• Model #: B-PMFS-M

Limited time offer, ends 09/30

• Model #: 11-001-235

Limited time offer, ends 09/30

• Model #: 11-001-325

• Brand: Watercool
• Model: 68002
• Part Number: WAT-0133
• Type: VGA Block & Cooler
• Model #: 68002

• Type: CPU Block
• Model #: PC-SPREP

Limited time offer, ends 09/30

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 1.0mm
• Dimensions: 20mm x 20mm x 1.0mm
• Model #: 11-001-272

Limited time offer, ends 09/30

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098