DIY Cooling

Limited time offer, ends 10/30

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 0.5mm
• Dimensions: 20mm x 20mm x 0.5mm
• Model #: 11-001-270

Limited time offer, ends 10/30

• Model #: 11-001-235

Limited time offer, ends 10/30

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

Limited time offer, ends 10/30

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Purchase different thickness copper thermal pad you purpose one-step,default combination: 1 piece - 0.1mm 1 piece - 0.3mm 1 piece - 0.4mm 2 pieces - 0.5mm 1 piece - 0.6mm 2 pieces - 0.8mm 1 piece - 1.0mm 1 piece - 1.2mm
• Dimensions: 15x15mm
• Model #: CU-PAD-KIT

Limited time offer, ends 10/30

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 1.0mm
• Dimensions: 20mm x 20mm x 1.0mm
• Model #: 11-001-272

Ten Dollars off w/ promo code PHAN239, limited offer

• Brand: Phanteks
• Type: GPU Water Block
• Block Compatibility: ASUS ROG Strix GeForce RTX® 4090 24GB ASUS ROG Strix GeForce RTX® 4090 OC Edition 24GB ASUS TUF-RTX4090-O24G-GAMING ASUS TUF-RTX4090-24G-GAMING
• Block Dim.: 11.34 x 5.17 x 1 in (288.15 x 131.244 x 26 mm)
• Model #: PH-GEF_GPU4090AS_DBK01

(1)

• Type: CPU Block
• Block Compatibility: AMD Socket AM4 / AMD Socket AM5 / Intel LGA 1700
• Color: Stealth Gray
• LED Color: RGB
• Model #: CX-9010021-WW

Limited time offer, ends 10/11

• Block Material: Aluminum
• Color: White
• Model #: BL-M2CLRGB-W

• Block Compatibility: M.2 SSD
• Model #: Heatsink 22x70x3

(1)

• Multi-channel Kit: Dual Channel Kit
• Brand: V-Color
• Series: XSky RGB
• Heat Spreader: Yes
• Model #: TMXSL00WWK

Limited time offer, ends 10/11

• Type: M.2 Heatsink NVMe SSD PS5 Heat Sink
• Model #: BL-M2CL-PT

Limited time offer, ends 10/11

• Brand: Adiven
• Type: cooler
• Features: Designed for M.2 SSD: The NVME Heat Sink is specially designed for M.2 2280 SSD, which is very suitable for Laptop, Desktop Computers/PS5, etc. 10-30°C Cooling Effect: Pure Copper coverd by Graphite, Copper(401 W/mK) has better heat dissipation than aluminum alloy(237W/mk), and the groove design greatly increase the heat dissipation area, with 10°C - 30°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling, improving the performance of your computer. Comes with Thermal Pad, Rubber Rings and bandages: thermal pad is made from Silicon Grease Material, with good thermal conductivity ability. Soft enough and good ductility, compatible with uneven surfaces of the M.2 SSD. Low viscosity, with no damage to the SSD warranty label. The bandages can bear...
• Model #: AD-M2CL722

• Type: Chipset Block
• Model #: 1022619

Limited time offer! Don't miss it!, ends10/11

• Model #: BPM-TRX5AIO-P

• Model #: 1-Water-Cooling1535

• Type: Accessories
• Model #: 1025199

(39)

• Type: Liquid Cooling System
• Block Compatibility: Intel LGA 2066 / 2011 / 1700 / 1366 / 1156 / 1155 / 1151 / 1150 AMD AM5 / AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2 / FM1
• Fan RPM: PWM 500~2000 R.P.M With L.N.C PWM 500~1500 R.P.M
• Color: Black
• Model #: CL-W306-CU12BL-A

• Brand: Barrowch
• Model: 6937826665349
• Part Number: FBRAMLD-01
• Color: Black
• Model #: 6937826665349

• Type: CPU Block
• Model #: 4250197138512

• Model #: 1-Com-Cooler1341

• Model #: CL-W345-PL00SW-A

• Model #: BPM-RAMCD5S-LNWB

• Type: CPU Block
• Model #: N-GY3090GAMER-TC

• Type: CPU Block
• Model #: CPU-RAY-ON-M-NE

• Model #: 1-CaseFans1397

(5)

Limited time offer, ends 10/11

• Parts: 1 Year
• Labor: 1 Year
• Model #: Heatsink880X

• Model #: 596826043036

• Type: CPU Block
• Model #: N-GY3070BK-X

Limited time offer, ends 10/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 10 pcs of 8.8x8.8x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces....
• Model #: 11-001-393

• Type: CPU Block
• Model #: N-MS3060TRIO-X-NE

• Model #: CL-W344-PL00SW-A

• Type: CPU Block
• Model #: 4251312602956

• Type: Cooling
• Model #: DynatronA39

• Type: Liquid Cooling System
• Model #: RAMLA V3

• Type: CPU Block
• Model #: 4250197138932

• Model #: N-RTX6000-X