DIY Cooling

• Block Compatibility: M.2 SSD
• Model #: Heatsink 22x70x3

• Block Compatibility: M.2 2280 SSD
• Block Material: Aluminum
• Radiator Material: Aluminum
• Parts: 1 Year
• Model #: 2 x HS 70x22x3

Limited time offer, ends 07/05

• Type: M.2 Heatsink NVMe SSD PS5 Heat Sink
• Model #: BL-M2CL-PT

• Used For: Consumer
• HeatSink: with HeatSink
• Height: 3.1"
• Width: 1.0"
• Model #: SB-HTSK

• Used For: Consumer
• HeatSink: with HeatSink
• Package Content: • Rocket NVMe Heatsink • Thermal tap • Screws • Screwdriver • Installation guide
• Model #: SB-HTSS

(5)

Limited time offer, ends 07/05

• Parts: 1 Year
• Labor: 1 Year
• Model #: Heatsink880X

(1)

• Multi-channel Kit: Dual Channel Kit
• Brand: V-Color
• Series: XSky RGB
• Heat Spreader: Yes
• Model #: TMXSL00WWK

• Type: CPU Block
• Model #: PC-PURE

Limited time offer, ends 06/30

• Model #: 11-001-194

• Type: CPU Block
• Model #: CP-NWD5-V2-CT60-200

Limited time offer, ends 07/06

• Model #: M.2-SSD Heatsink

• Type: CPU Block
• Model #: PC-OP32K-OUPK

• Type: Complete DIY Water-Cooling Kit
• Block Compatibility: Intel: LGA 1700 AMD: AM4 /AM5
• Block Dim.: 72 x 64 x 25.7mm (2.83 x 2.52 x 1in)
• Radiator Size: 360mm
• Model #: PH-GEF_KIT360-D30_DWT

Limited time offer, ends 06/30

• Model #: 11-001-127

Limited time offer, ends 06/30

• Model #: 11-001-193

Limited time offer, ends 07/05

• Brand: Adiven
• Type: cooler
• Features: Designed for M.2 SSD: The NVME Heat Sink is specially designed for M.2 2280 SSD, which is very suitable for Laptop, Desktop Computers/PS5, etc. 10-30°C Cooling Effect: Pure Copper coverd by Graphite, Copper(401 W/mK) has better heat dissipation than aluminum alloy(237W/mk), and the groove design greatly increase the heat dissipation area, with 10°C - 30°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling, improving the performance of your computer. Comes with Thermal Pad, Rubber Rings and bandages: thermal pad is made from Silicon Grease Material, with good thermal conductivity ability. Soft enough and good ductility, compatible with uneven surfaces of the M.2 SSD. Low viscosity, with no damage to the SSD warranty label. The bandages can bear...
• Model #: AD-M2CL722

• Model #: MYH-0244

• Type: CPU Block
• Model #: CP-PARX-X-CT50-100-BK

• Type: CPU Block
• Model #: CP-DWPB-X

Limited time offer, ends 06/30

• Model #: 11-001-289

Limited time offer, ends 06/30

• Model #: 11-001-100

• Type: CPU Block
• Tube Material: POM
• Reservoir Capacity: 200mm
• Model #: 6932167226792

Limited time offer, ends 06/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 5 pcs of 14x14x6mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. Th...
• Model #: 11-001-395

Limited time offer, ends 06/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 10 pcs of 11x11x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. T...
• Model #: 11-001-394

Limited time offer, ends 06/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 10 pcs of 8.8x8.8x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces....
• Model #: 11-001-393

• Type: CPU Block
• Model #: CT-D5-180-X-V2

• Type: CPU Block
• Model #: FAF90-TBK

• Type: CPU Block
• Model #: 6932167225849

• Type: CPU Block
• Model #: CL-CLT-27D-X

• Type: CPU Block
• Model #: B-GRP-1.2-X

• Type: CPU Block
• Model #: B-RAM-D4-X-V2

• Type: CPU Block
• Model #: B-GRP-1.5-X

• Type: CPU Block
• Model #: CP-PARX-X-CT50-200-BK

• Type: CPU Block
• Model #: CP-NWD5-V2-CT60-60

• Type: CPU Block
• Model #: B-UL-D5-X-V4

• Type: CPU Block
• Model #: RGV-LAN-O11MINI-P-K-NE

• Type: CPU Block
• Model #: RGV-LAN-011-LI-P

• Type: CPU Block
• Model #: CP-DDCITN-X

• Type: CPU Block
• Model #: CR-RD120RC-TK100

• Type: CPU Block
• Model #: CR-RD480RC-TK100

• Type: CPU Block
• Model #: CR-RD240RC-TK100

• Model #: 5060681982687

• Model #: 5060681982700

• Type: Complete DIY Water-Cooling Kit
• Block Compatibility: Intel: LGA 1700 AMD: AM4 /AM5
• Block Dim.: 72 x 64 x 25.7mm (2.83 x 2.52 x 1in)
• Radiator Size: 360mm
• Model #: PH-GEF_KIT360-D30_DBK

• Model #: 5060681982717

• Model #: 5060681982724

• Model #: 5060681982151

• Model #: 5060681982939

• Model #: 5060681983400

• Model #: 5060681982960

• Model #: 652843973241

• Model #: AU-GTBXYSD129

• Model #: DF-12025-ARGB-251

• Model #: 356571540330

• Model #: 1-Com-Cooler2008

• Model #: C00F-112411

• Model #: C00F-112426

• Model #: CLAWB0FC2R9J6L

• Model #: C00F-112407

• Model #: 1-CaseFans0162

• Model #: CLAWB0FWK18D9V

• Model #: 994255004619

• Model #: CLAWB0F13M363B

• Model #: 9391048855327

• Model #: 537470347149

OUT OF STOCK

• Type: SSD Heatsink
• Color: Black
• Specification: Material: Aluminum Module Compatibility: M.2 2280 Compatibility: Single/Double side M.2 NVMe SSD
• Package Contents: Accessories: 1 x M.2 Heatsink 1 x Base Thermal pad (0.5mm x 2, 1.00mm x 2)
• Model #: ESC001-BK