DIY Cooling

Limited time offer, ends 07/19

• Type: M.2 Heatsink NVMe SSD PS5 Heat Sink
• Model #: BL-M2CL-PT

• Model #: 1023672

Limited time offer, ends 07/19

• Block Material: Aluminum
• Color: Black
• Model #: BL-M2CLRGB-B

Limited time offer, ends 07/31

• Model #: 11-001-024

• Block Compatibility: M.2 SSD
• Model #: Heatsink 22x70x3

• Block Compatibility: M.2 length support: 2280 (22mm x 80mm)
• Type: Cooling kit
• Block Dim.: Heatsink : 70mm (W) x 10mm (H) x 20mm (D), 16.1g Blue Pad : 70mm (W) x 1mm (H) x 20mm (D), 3.25g Gray Pad 1 : 60mm(W) x 1mm(H) X 20mm(D), 2.8g Gray Pad 2 : 60mm(W) x 1.5mm(H) X 20mm(D), 3.7g Thermal pad thickness: 1.0mm, 1.5mm
• Block Material: Aluminum, silicone
• Model #: SST-TP02-M2

• Block Compatibility: M.2 2280 SSD
• Block Material: Aluminum
• Radiator Material: Aluminum
• Parts: 1 Year
• Model #: 2 x HS 70x22x3

Limited time offer, ends 07/20

• Model #: M.2-SSD Heatsink

• Model #: 10230

• Model #: 4250197138932

• Model #: 10229

• Model #: DZ-M.2 Cooler-004

• Model #: 1022787

Limited time offer, ends 07/19

• Brand: Adiven
• Type: cooler
• Features: Designed for M.2 SSD: The NVME Heat Sink is specially designed for M.2 2280 SSD, which is very suitable for Laptop, Desktop Computers/PS5, etc. 10-30°C Cooling Effect: Pure Copper coverd by Graphite, Copper(401 W/mK) has better heat dissipation than aluminum alloy(237W/mk), and the groove design greatly increase the heat dissipation area, with 10°C - 30°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling, improving the performance of your computer. Comes with Thermal Pad, Rubber Rings and bandages: thermal pad is made from Silicon Grease Material, with good thermal conductivity ability. Soft enough and good ductility, compatible with uneven surfaces of the M.2 SSD. Low viscosity, with no damage to the SSD warranty label. The bandages can bear...
• Model #: AD-M2CL722

• Model #: 4250197145909

• Type: Pump
• Block Compatibility: False
• Pump Bearing: 0
• Pump Capacity: PUM Alphacool Eisstation VPP inkl. Alphacool Eispumpe VPP755
• Model #: 13295

• Model #: 10228

Limited time offer, ends 07/20

• Color: Black
• Model #: HDALMBK-2P

Limited time offer, ends 07/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 10 pcs of 8.8x8.8x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces....
• Model #: 11-001-393

• Model #: CL-W345-PL00SW-A

• Type: Heatsink
• Block Compatibility: 2280 M.2 SSD
• Block Material: Aluminum
• Radiator Size: 22x70x6mm
• Model #: HS22x70x6

• Model #: CL-W344-PL00SW-A

Limited time offer, ends 07/19

• Model #: HT-ComCoolin000196

• Color: N/A
• Model #: DZ-M.2 Cooler-003

Limited time offer, ends 07/31

• Model #: 11-001-025

• Model #: 4250197138512

• Model #: BPM-TRX5AIO-P

(5)

Limited time offer, ends 07/19

• Parts: 1 Year
• Labor: 1 Year
• Model #: Heatsink880X

• Model #: 18090

• Model #: 1-CaseFans0759

• Color: RGB
• Model #: TM-07

Limited time offer, ends 07/19

• Model #: 1-Com-Cooler0134

• Model #: 1-Com-Cooler1341

Limited time offer, ends 07/18

• Type: M2 SSD Heatsink
• Color: RGB
• Model #: 2#Q0961_B

• Model #: 1024103

Limited time offer, ends 07/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 11mm x 11mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 11mm x 11mm x 5mm 3M 9448A Heat-conductive adhesive tape is included Package Content: 20 x Heatsink
• Di...
• Model #: 11-001-049