Distance: Maximum Distances - (1080i only)
CAT5E (stranded) - 40m (130 ft.)
CAT5E (solid) - 50m (165 ft.)
CAT6 (stranded or solid) - 50m (165 ft.)
Max Distance: 50m / 165 ft.
Resolution Support: Maximum Digital Resolutions: 1080p / 1920x1080
Supported Resolutions:
1080i
- Cat6 (stranded or solid) - up to 50m
- Cat5e (solid) - up to 50m
- Cat5e (stranded) - up to 40m
1080p
- Cat6 (solid or stranded) - up to 40m
- Cat5 (solid) - up to 20m
- Cat5 (stranded) - up to 16m
See product manual for further details
HDMI: Local Unit Connectors:
1 x HDMI (19-pin) Female
Remote Unit Connectors:
1 x HDMI (19-pin) Female
Network Interface: Local Unit Connectors:
2 x RJ-45 Female
Remote Unit Connectors:
2 x RJ-45 Female
Specification: Wideband IP Paging Adapter & Bell Scheduler for Integrating Legacy Analog Amplifiers – PoE
ENVIRONMENTAL: 0 to + 40° C (32 to 104° F); 10-95% RH non-condensing. Dry indoor locations only.
Audio: MICROPHONE: Connection available for external microphone
AUDIO MEMORY & FORMAT: 1 GByte audio storage for WAV or MP3 files
AUDIO CONTROLS: Volume, AGC, Latency, LF Cut
ANTI-FEEDBACK DELAY: Cache to memory and release
AUDIO DELAY: Programmable 1-1000 ms synchronization delay
Power Consumption: Sender: 10W maximum
Receiver: 20W maximum
Power Supply: Sender: 5V DC 2.6A, locking
Receiver: 5V DC 4A, locking
Specification: Maximum Pixel Clock: 165 MHz
Video Input Connector (Sender): (1) DVI 29-pin, female, digital only
Video Local Output Connector (Sender): (1) DVI 29-pin, female, digital only
Video Output Connector (Receiver): (1) DVI 29-pin, female, digital only
Line Input (Sender): (1) 3.5mm mini-stereo jack
Line Output (Receiver): (1) 3.5mm mini-stereo jack
USB Host Interface (Sender): (1) USB Type B, female
USB Device Connectors (Receiver): (4) USB Type A, female
RS-232 Connector (Sender): 1) DB-9, female
RS-232 Connector (Receiver): (1) DB-9, male
Ethernet connector (Sender): (1) RJ-45, female
Ethernet connectors (Receiver): (3) RJ-45, female
Mode button (Sender): (1) tact-type
+ / USB button (Receiver): (1) tact-type
-...
Video: Video outputs
DisplayPort, Single link DVI-I
VGA (via included convertor, highest resolutions only with reduced blanking)
In "Dual screen" mode, connection can occur either through DVI and DisplayPort, or through VGA and DisplayPort.
Audio: Analog audio from ClickShare CSC Base Unit software
v01.02.00.09 onwards
Digital audio (embedded in DP signal) from ClickShare CSC Base Unit software v01.05.00.32 onwards
Specification: Maximum Pixel Clock: 2x 165 MHz
Video Input Connector: (1) DVI-I 29-pin, female
Video Output Connector: (1) DVI-I 29-pin, female
Operating temperature range: +5 to +45 deg. Celsius
Power Supply: 5V DC (needed for programming only)
Power Consumption: 5 Watts (max)
Feature: Quick and easy way to store EDID information from any DVI display
Provides a virtual EDID to maintain active monitor status when switching away from a source
Supports resolutions up to 1920x1200, 2K, and 3840x2400 (Dual Link)
EDID write protection switch
No power is required after initial programming