Specifications: NOTE: 1. The adapter need for external power adapter to work. 2. When connecting the riser need to turn off your computer. 3. IDE Hard disk / CD-ROM motherboard SATA adapter when the need to hard disk / CD-ROM set jumpers main dish.
Specifications: Converts Serial ATA to Parallel ATA
Supports ATA 100/133
Fit for 3.5/2.5 SATA HDD DVD.
One 40pin IDE port.
One Serial ATA port.
One 4pin power connector.
Chipset : JM20330
Features: SATA to IDE Adapter ("Convert SATA Hard Drive to IDE Hard Drive")
Connect a SATA hard drive to you IDE motherboard with this SATA to IDE Adapter
Turn your SATA hard drive into IDE interface hard drive
Features the JMicro JM20330 chipset
Compliant with SATA specification and supports up to 2TB hard drives
Feature: Support All Video Formats:USB 2.0 Video Capture Adapter provides a link between a PC and a video device with RCA connector or Audio/S-Video connector, such VHS, VCR, DVD.Support All Video Formats: DVD+/-R/RW, DVD+/-VR, and DVD-Video.
High Performance:Capture audio without the sound card.Support brightness contrast hue and saturation control.Share finished projects on DVD, tape, the Web, and mobile devices. High-speed rendering and real-time performance mean less time waiting and more time creating.
Easy Operation:USB 2.0 interface, plug and play. Connect the analog signal video recorder with your PC/Laptop and Achieve the conversion to digital signal Capture High-quality Video & Audio through popular USB 2.0 interface and not need external power.
Great Compatibility:Support for most formats: DVD+/-R/RW, DVD+/-VR, and DVD-Video. Applying to internet conference / ne...
Specifications: Item: M. 2 SSD to USB 3.1 Type A Adapter Board. Material: PCB Board. Protocol: B-Key and M-Key. Input: M.2 SSD Slot, both B-Key and M-Key M.2 SSD (NVMe, SATA Based). Output: USB 3.1 Type A. Dimension: 115*25*6 mm. Transfer Speed: 10Gbps/ 5Gbps (NOTE: If connect with usb 3.0 type a port, speed will be 5Gbps).
Operating System Supported: Plug and Play for Windows10; MacOS 10.13.6 to 11.x; iPadOS; Linux Kernel 5.x and above; up-to-date Chrome OS:
Step 1:Plug in the adapter, then connect an Ethernet cable between your router or modem and the Ethernet port on the adapter. Step 2:Just start using it when one LED is blinking. Note:Open
Features: - USB-C/USB-A(5Gbps) compliant with USB Spec 3.0, 2.0 and 1.1. - USB to Ethernet Adapter runs as 2.5Gbps is prepared for now and ready for future-proof.
- Designed for USB-C compatible devices, reversible plug orientation and no external power needed. - Support 'Wake-On-Lan' and ‘RealWoW!’ to enable remote wake-up of a