Wired & Wireless Accessories

(6)

• Type: Antenna
• Specifications: Frequency: 2.4GHz~2.5GHz Gain: 3dBi Radiation: Omni-directional VSWR(MAX.): 1.92:1 MAX Polarization: Linear, Vertical Connector Type: RP-SMA Male (Plug) Extended Cable/Length: RG-174 100cm Mounting: Desktop Application: Indoor
• Model #: TL-ANT2403N

• Type: PoE Converter
• Color: Black
• Specifications: Networking Interface: PoE In (802.3af): 1 x Gigabit RJ45 Port PoE Out (24V Passive): 1 x Gigabit RJ45 Port Operating Temperature: 0 to 70 degree C (32 to 158 degree F) Power Input: 48V, 802.3af Max. Power Output: 24V, 0.5A Power Method: 24V Passive PoE (Pairs 4, 5+; 7, 8 Return)
• Model #: INS-3AF-I-G

• Type: PoE Converter
• Color: White
• Specifications: Networking Interface: PoE In (802.3af): 1 x Gigabit RJ45 Port PoE Out (24V Passive): 1 x Gigabit Ethernet Cable Operating Temperature: -30 ~ 70 degree Celsius (-22 ~ 158 degree Fahrenheit) Power Input: 48V, 802.3af Max. Power Output: 24V, 0.5A Power Method: 24V Passive PoE (Pairs 4, 5+; 7, 8 Return) Ethernet ESD / Surge Protection: +/- 15 KV
• Model #: INS-3AF-O-G

• Type: PoE Adapter
• Color: Black
• Specifications: Output Voltage: 15V DC @ 0.8A Rated Voltage: 100-240V AC @ 50/60 Hz Input Current: 0.3A @ 120VAC,0.2A @ 240VAC Inrush Current: <30A Peak @ 120V AC, <60A Peak @ 230V AC Efficiency: 75+% Output Ripple: 1% Max. Switching Frequency: 50 kHz Operating Temperature: 0 to 40 degree C (32 to 104 degree F) Storage Temperature: 30 to
• Features: Provides Earth Grounding and Surge Protection Helps Protect Against ESD Events Powers Ubiquiti PoE Devices
• Model #: POE-15-12W

• Type: Adapter
• Color: White
• Specifications: Bus Type: USB 3.1 Gen 1 Chipset ID: Realtek RTL8153 VLI VL817 Industry Standards: IEEE 802.3i (10BASE-T) IEEE 802.3u (100BASE-T) IEEE 802.3ab (1000BASE-T) IEEE 802.1q (VLAN Tagging) Interface: RJ45 (Gigabit Ethernet) Ports: 1 USB Pass-Through: Yes : Auto MDIX: Yes Compatible Networks: 10/100/1000 Mbps Full Duplex Support: Yes Jumbo Frame Support: 9K max. Maximum Data Transfer Rate: 5 Gbps (USB 3.1 Gen 1) Promiscuous Mode: Yes
• Model #: US1GC301AUW

• Type: PoE Repeater
• Color: Black
• Specifications: Standards: IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af IEEE 802.3at Device Interface: 1 x Gigabit PoE/PoE+ in port 1 x Gigabit PoE/PoE+ out port 1 x Power port (optional power adapter is not included) LED indicators Installation mounting points Data Transfer Rate: Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Gigabit: 2000 Mbps (full duplex) Power: Powered by PoE/PoE+ Device Consumption: 2 Watts (max.)
• Model #: TPE-E100

• Type: PoE Splitter
• Color: White
• Specifications: Connectors: 2 x RJ-45, shielded, EIA 568A and 568B DC Jacks On unit: O.D x I.D = 2.5 x 6.4mm Ext. Cable #1: O.D x I.D = 5.5 x 2.5mm Ext. Cable #2: O.D x I.D = 3.4 x 1.4mm Data Rate: 10/100/1000 Electrical: Pin Assignment & Polarity: 3/6 (+),1/2 (-) or 4/5 (+),7/8 (-) Input voltage: 44 - 57 Vdc Input power: 70W max Output power: 54W max Output Current: 5A @ 12V; 2.5A @ 24V Indicators: Output Power Indicators: Green LED (4-pairs), Yellow LED (2-pairs) Thermal Rating: 38 BTU/Hr Reliability MTBF: 100,000 hours @ 25 degree C
• Model #: PD-AS-951/12-24

• Type: PoE Extender
• Color: Black
• Specifications: Ethernet Interface: Copper: 10/100BASE-TX RJ45 auto-negotiation / auto-MDI / MDI-X Power over Ethernet Standard: IEEE 802.3at/af PoE PSE (Power Source Equipment) PoE Output: 56V DC, 600mA max. PoE Budget: Up to 25 watts PoE Mode: End-span, RJ45 Pin 1/2 (+), 3/6 (-) Data Rate: 100/100 Mbps Cabling: Cat5e or above Maximum Distance: 100 meters Maximum Frame Size: 1522 bytes LED Indicators: 4 x LEDs PWR LRP LNK PoE-in-use LNK / ACT ESD Protection: 4KV DC Enclosure: Metal case Installation: Wall mount or DIN rail with optional kit Power Requirements: BNC Power over Coaxial Input: 44~56V DC Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af Power over Ethernet (802.3at Type 1) IEEE 802.3at Power over Ethernet Plus(802.3at Type 2)
• Model #: LRP-101CE

• Type: UPoE Splitter
• Color: Black
• Specifications: Standards: IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3af IEEE 802.3at IEEE 802.3bt compatible Device Interface: 1 x Gigabit port 1 x Gigabit Ultra PoE in port 4-pin removable terminal block (dual DC output) Adjustable output power DIP switch (48V, 24V, 16V, 12V) LED indicator DIN-Rail mount Wall mount Grounding point Data Transfer Rate: Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Gigabit: 2000 Mbps (full duplex) Special Features: Hardened components rated for extreme temperatures Dual DC power output Auto-Negotiation ESD 4kV and Surge 2kV protection Power: Input: 15.4W / 30W / 60W / 95W PoE power Max. Consumption: 7W (splitter only) Max. Combined DC Output: 48V (1.25A), 24V (2.3A), 16V (2.3A), 12V (2.3A) Package Contents...
• Model #: TI-SG104

• Type: PoE Extender
• Color: Black
• Specifications: Ethernet Interface: LRP-101CH Copper: 10/100BASE-TX RJ45, auto-negotiation / auto-MDI/MDI-X Power over Ethernet Standard: IEEE 802.3at/af PoE PD (Powered Device) PoE Input: Supports both Mid-span and End-span PSE Input Range: 48~56V DC Data Rate: 100/100 Mbps Cabling: Cat5e or above Maximum Distance: 100 meters Maximum Frame Size: 1522 bytes LRP-101CE Copper: 10/100BASE-TX RJ45, Auto-negotiation / auto-MDI/MDI-X Power over Ethernet Standard: IEEE 802.3at/af PoE PSE (Power Source Equipment) PoE Output: 56V DC, 600mA max. PoE Budget: Up to 25 watts PoE Mode: End-span, RJ45 Pin 1/2 (+), 3/6 (-) Data Rate: 100/100 Mbps Cabling: Cat5e or above Maximum Distance: 100 meters Maximum Frame Size: 1522 bytes LED Indicators: LRP-101CH 4 x LEDs PWR LRP LNK PoE IN LNK / ACT LRP-101CE 4 x LEDs PWR LRP LNK PoE-in-us...
• Model #: LRP-101C-KIT

• Type: PoE Adapter
• Specifications: Input Voltage AC: 100-240V AC Output Voltage DC: 56V DC Power Output: 65W. Max. Operating Temp: 0 to 40 degree C
• Model #: PWR-65-56

• Type: PoE Injector
• Specifications: Interface: "Data" Input Port: 1 x RJ-45 STP "PoE (Data+Power)" Output Port: 1 x RJ-45 STP Input power terminal block: 1 LED Indicator: System: Power 1, Power 2, Fault (Green) PoE Port: PoE in Use x 1 (Green) Network Cable: 10Base-T: UTP Cat. 3, 4, 5, up to 100m (328 ft.) 100Base-TX: UTP Cat. 3, 4, 5, up to 100m (328 ft.) 1000Base-T: UTP Cat. 5, 5e, 6 up to 100m (328 ft.) EIA/TIA- 568 100-ohm STP (100m) Data Rate: 10/100/1000Mbps Dimension: 1.26" x 5.31" x 3.46" Weight: 1.05 lbs. Unit Input Voltage: 24 - 48V DC; 24V AC Power Consumption: 30 watts max. Number of device can be powered: 1 Installation: DIN rail kit and wall mount ear Alarm: Provides one relay output for power failure, Alarm relay current carry ability: 3A at DC 30V Enclosure: IP30 slim type metal case Power over Ethernet PoE Standard: IEEE 802.3at High ...
• Model #: IPOE-162

• Type: PoE Injector
• Specifications: Interface: "Data" Input Ports: 16 x RJ45 "Data + Power" Output Ports: 16 x RJ45 Management Port: 1 x RJ45; 10/100/1000BASE-T, auto-negotiation, auto-MDI/MDIX Data Rate: 10/100/1000Mbps LED System: SYS PWR x 1 (Green), PoE Failure x 1 (Red), Fan Failure x 2 (Red) Management port x 2: 1000 (Green), 10/100(Orange) Per PoE Port: Ultra 60W PoE-in-use x 1 (Green), 802.3at/af PoE-in-use x1 (Orange), PoE Power Usage LED x4 (Green) Power Requirements: 100 - 240V AC, 50/60 Hz, 8A Power Consumption: 800 watts (max.) / 2729BTU Ventilation: Fan x 3 Enclosure: Metal PoE Standard: IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus 4-pair Ultra PoE PoE Power Supply Type: End-span / Mid-span / UPoE (Ultra PoE) Power Pin Assignment: Pair 1 end-span: 1/2(-), 3/6(+) Pair 2 mid-span: 4/5(+), 7/8(-) UPoE: 1/2(-), 3/6(+),...
• Model #: UPOE-1600G

• Type: PoE Injector
• Color: Black
• Specifications: Standards - IEEE 802.3 - IEEE 802.3u - IEEE 802.3ab - IEEE 802.3af - IEEE 802.3at - IEEE 802.3bt Device Interface - 1 x Gigabit port - 1 x 4PPoE Gigabit port - 4-pin removable terminal block - LED indicators - DIN-Rail mount - Wall mount - Grounding point Power - Input: 52 - 56 V DC - Compatible power supply: TI-S12048 (sold separately) - Max. consumption (PoE): 72W Operating Temperature: - 40° - 75° C (-40° - 167° F) Operating Humidity: Max. 95 % non-condensing Dimensions (L x W x H): 104 x 82 x 32mm (4.10" x 3.20" x 1.20") Weight: 154g (5.4 oz.)
• Model #: TI-IG90

• Type: PoE Injector
• Specifications: Interface: Input Port: 1 x RJ45 STP Data In Output Port: 1 x RJ45 STP PoE (Data + Power) Out Input power terminal block: 1 Network Cable: Twisted-pair cable up to 100 meters (328 ft.) 10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6 100BASE-TX: 4-pair UTP Cat. 5, 5e, 6 1000BASE-T: 4-pair UTP Cat. 5e, 6 Data Rate: 10/100/1000 Mbps Dimensions: 1.26" x 5.31" x 3.46" Weight: 0.95 lb. Power Requirements: DC 48~56V, 2A max. Unit Output Voltage: DC 45~53V Power Consumption: 75 watts max. Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3bt 4-pair Power over Ethernet Type 3 IEEE 802.3at Power over Ethernet Plus IEEE 802.3af Power over Ethernet Package Contents: IPOE-171-60W User's manual Wall-mount kit Dust cap
• Model #: IPOE-171-60W

• Type: PoE Splitter
• Color: Black
• Specifications: Interface: "PoE (Power + Data)" Input Port : 1 x RJ-45 10/100/1000Base-T "Data" Out Port: 1 x RJ-45 10/100/1000Base-T DC Out Plug Connector: 1 removable 4-Pin terminal block LED Indicator: System: Power Ready x 1 (Green) Network Cable: 10/100/1000Base-T: 4-Pair UTP Cat. 5, 5e, 6 Distance up to 100m (328 ft.) EIA/TIA- 568 100-ohm STP (100m) Data Rate: 10/100/1000 Mbps (vary on Ethernet device attached) DIP Switch: 12V DC / 24V DC output voltage Power Input: 802.3at PoE 48~56V DC Power Output: 12V / 24V DC, max 2A (adjustable) Enclosure: IP30 metal case Installation: DIN rail kit and wall mount ear ESD / EFT Protection: 6 KV DC PoE Standard: IEEE 802.3at High Power over Ethernet Number of devices that can be powered: 1 or 2 (Vary on device's power requirement; DC1 + DC2 cannot be over 25 watts.) ...
• Model #: IPOE-162S

• Type: PoE Injector
• Color: Black
• Specifications: Interface: LAN: 1 x RJ-45 STP, "Data" Input Port POE: 1 x RJ-45 STP, "Data + Power" Output Port AC Connector: 1 x AC Input power socket, IEC-320 C6 Network Cable: Ultra PoE (60W): 4-pair UTP Cat. 5, 5e, 6 up to 100m (328 ft.) 802.3af / at PoE(15W / 30W): 2-pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) LED Indicator: System: Power x 1 (Green) PoE Port: Active, PoE ready / In Use x 1 (Green) Data Rate: 10/100/1000 Mbps Unit Output Voltage: DC 50-57V, 1.2A Power Requirements: 100-240V AC @ 50/60 Hz, 1.5A max. Power Consumption: 60 watts max. PoE Standard: Ultra PoE over 4-pairs UTP, High Power over Ethernet End-Span / Mid-Span PSE PoE Power Supply Type: End-Span + Mid-Span Power Pin Assignment: Pair 1 End-Span: 1/2 (+), 3/6 (-) Pair 2 Mid-Span: 4/5 (+), 7/8 (-) PoE Power Output: DC 50-57V/60-w...
• Model #: POE-173

• Type: PoE Splitter
• Color: White
• Specifications: Interface: PoE (Power + Data) Input Port: 1 x RJ-45 STP Data” Output Port: 1 x RJ-45 STP DC Out Plug Connector: 1 LED Indicator System: PoE In x 1 (Green) Network Cable: 10Base-T: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) 100Base-TX: 2-Pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) 1000Base-T: 2-Pair UTP Cat. 5, 5e, 6 up to 100m (328 ft.) EIA / TIA-568 100-ohm STP (100m) Data Rate: 10/100/1000 Mbps (varies on Ethernet device attached) DIP Switch: 12V DC / 24V DC output voltage Power Input: 802.3at PoE+ 52 ~ 56V DC PoE Standard: IEEE 802.3at High Power over Ethernet Number of clients device can be powered: 1 Power Output: 12V DC, 2A max 24V DC, 1A max Standards Compliance: IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Fast Ethernet IEEE 802.3ab 1000Base-T Gigabit Ethernet IEEE 802.3at...
• Model #: POE-162S

• Type: Antenna
• Specifications: Frequency: 2.3 ~ 2.7GHz Impedance: 50O Gain: 24 dBi (Exclude Cable Loss) VSWR(MAX.): 1.8 HPOL Beamwidth: 6 degree (3dB) VPOL Beamwidth: 6 degree (3dB) Elevation Beamwidth: 6 degree (3dB) Polarization: Horizontal & Vertical Mounting: Pole Mount F/B Ratio: 32dB Min Survival Wind Speed: 241 Km/h Standards: RoHS, WEEE Interfaces: RP-SMA
• Model #: TL-ANT2424MD

• Type: PoE Extender
• Specifications: PoE Standard: IEEE 802.3af (Power over Ethernet) IEEE 802.3at (High Power over Ethernet) PoE Power Supply Type: Mid-Span / Type B PoE Power Output: 52V DC, 510 mA, Max. 26 watts Power Pin Assignment: 4/5 (+), 7/8 (-) Maximum Distance: 4 units, daisy-chain installation with 500m support Data Rate: 10/100/1000 Mbps Switch Architecture: Store-and-Forward Maximum Frame Size: 1552 Bytes Flow Control: Back pressure for half-duplex IEEE 802.3x pause frame for full-duplex LED Indicators: 1 x PoE IN (Green) 1 x LAN Data (Green) 1 x PoE OUT (Green) Power Requirements: IEEE 802.3at compliant with voltage within 52V-56V DC Power Consumption: 3.2 watts (system maximum)
• Model #: POE-E201

• Type: PoE Injector
• Color: Black
• Specifications: Standards: IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3af IEEE 802.3at Device Interface: 1 x Gigabit port 1 x PoE+ Gigabit port 4-pin removable terminal block LED indicators DIN-Rail mount Wall mount Grounding point Data Transfer: RateEthernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Gigabit: 2000 Mbps (full duplex) Power: Input: 48 – 56 V DC Compatible power supply: TI-S12048 (sold separately) Consumption: Max. 36 Watts PoE: PoE budget: 30 Watts Pin 1,2 for power- and pin 3,6 for power+ (mode A)
• Model #: TI-IG30

• Type: Converter
• Specifications: 10/100/1000BASE-T (RJ-45) [100 m/328 ft.] to 1000BASE-SX 850nm multimode (SC) [62.5/125 µm fiber: 220 m/722 ft.] Link Budget: 7.0 dB [50/125 µm fiber: 550 m/1804 ft.] Standards: IEEE 802.3 Max Frame Size: untagged: 1632 bytes / tagged: 1628 bytes Status LEDs: PWR (Power): (below RJ-45) ON = Lit for normal operation FX-Link/Act (Fiber Link/Activity): (Upper Left on RJ-45) ON = Link; Flashing = Activity TX-Link/Act (Copper Link/Activity): (Upper Right on RJ-45) ON = Link; Flashing = Activity Power Consumption: 3.15 Watts Sources: Unit accepts 5 VDC to 28 VDC Wall Mount AC adapter: 12 VDC 400mA Environment Storage: -15 to +65 °C Operating: 0°C to 50°C Altitude: 0 – 10,000 feet Humidity: 5% to 95% (non-condensing) Compliance Safety: Wall Mount Power Supply, UL Listed, C-UL Listed (Canada) FCC Class A, CISPR22/EN55022...
• Model #: M/GE-PSW-SX-01-NA

• Type: Other
• Color: Black
• Specifications: Standards IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3z, IEEE 802.1P, IEEE 802.1q Data Rate Copper: 10/100/1000 Mbps Fiber: 1000 Mbps Filtering Addresses 8K MAC Addresses Max Frame Size 802.3ac tagged: 1628 bytes untagged: 1632 bytes Multimode Min TX PWR: -10.0 dBm Max TX PWR: -4.0 dBm RX Sensitivity: -17.0 dBm Max In PWR: 0.0 dBm Link Budget: 7.00 dB
• Model #: CGFEB1013-120

• Type: HDBaseT Extender
• Color: Black
• Specifications: Audio: Yes Cabling: Cat 5e UTP or better Daisy-Chain: No Ports: 1 Rack-Mountable: Yes Audio Specifications: 7.1 Surround Sound Max Distance: 70 m / 230 ft Maximum Cable Length: 229.6 ft [70 m] Maximum Digital Resolutions: 4096 x 2160 (4K) @ 30 Hz Wide Screen Supported: Yes Local Unit Connectors: 2 - HDMI (19 pin) Female Input 1 - DisplayPort (20 pin) Female Input 1 - 3.5 mm Mini-Jack (3 Position) Female Input 1 - VGA (15 pin, High Density D-Sub) Female Input 1 - HDMI (19 pin) Female Output 2 - IrDA (Infrared, SIR/FIR) Female 1 - RJ-45 Female Output Remote Unit Connectors: 1 - RJ-45 Female Input 1 - HDMI (19 pin) Female Output LED Indicators: 4 - port selection LEDs 2 - status LEDs (local) 1 - Status LED (remote) Center Tip Polarity: Positive Input Current: 0.6 A Input Voltage: 100 ~ 240 AC Out...
• Model #: STDHVHDBT

• Brand: Ubiquiti Networks
• Part Number: UACC-ETH-SP-Pro
• Type: Surge Protection
• Features: Enclosure Material: Polycarbonate Weatherproofing: IPX5 Networking Interface: (2) RJ45 female connectors DC Spark-Over Voltage: 90V @ 100V/s Max. Impulse Spark-Over Voltage: 600V @ 1kV/µs Discharge Current: 20kA Insulation: Max. Resistance: 1G ohm @ 50V Max. Capacitance: 1.0 pF @ 1 MHz Data Line Protection: Up to 10 Gbps PoE Support ESD/EMP Protection: Absorbing transient current with response to surge voltage from 100V/s to 1kV/µ
• Model #: UACC-ETH-SP-PRO

• Type: PoE Injector
• Color: Black
• Specifications: Interface: Input Port 1 x RJ-45 STP Data In Output Port 1 x RJ-45 STP PoE (Data + Power) Out DC socket 56V DC Input LED Indicator: System: Power x 1 (Green) PoE Port: PoE in Use x 1 (Green) Network Cable: Ultra PoE (60W): 10/100/1000Base-T: 4-Pair UTP Cat. 5e, 6 up to 100m (328 ft.) 802.3af/at PoE(15W / 30W): 10/100/1000Base-T: 2-Pair UTP Cat. 3, 5, 5e, 6 up to 100m (328 ft.) Data Rate: 10/100/1000 Mbps Unit Input Voltage: DC 56V Power Requirements: External AC-to-DC adapter 100-240V AC, 50/60 Hz, 1.5A Power Consumption: 65 watts max. PoE Standard: IEEE 802.3at High Power over Ethernet End-span / Mid-span PSE Power Output: DC 56V / 60-watt PoE via 4-pairs DC 56V / 30-watt PoE via 2-pairs PoE Power Supply Type: End-Span + Mid-Span Power Pin Assignment: Pair 1: 1/2 (-), 3/6 (+) Pair 2: 4/5 (+), ...
• Model #: POE-171

• Type: Cable
• Color: Black
• Specifications: Cable Characteristic Impedance: 100 ohms Crosstalk between pairs: 2% max Time delay: 1.31 nsec/ft
• Model #: J9281B

• Type: PoE Injector
• Color: Black
• Specifications: Interface: "Data" Input Port: 1 x RJ45 STP "PoE (Data + Power) Output Port: 1 x RJ45 STP AC Input Power Socket: 1 LED Indicator: System: Power x 1 (Green) PoE Port: Active, PoE ready-in-use x 1 (Green) Network Cable: 10BASE-T: 2-pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) 100BASE-TX: 2-pair UTP Cat. 3, 4, 5, up to 100m (328 ft.) EIA/TIA-568 100-ohm STP (100m) Data Rate: 10/100 Mbps Unit Output Voltage: DC 53V, 0.6A Power Requirements: 100-240V AC, 50/60 Hz, 0.75A Power Consumption: 30 watts (max.) Number of Devices that can be powered: 1 PoE Standard: IEEE 802.3at Power over Ethernet Plus / PSE PoE Power Output: DC 53V / 30 watts PoE Power Supply Type: Mid-span Power Pin Assignment: 4/5 (+), 7/8 (-) Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE ...
• Model #: POE-164

OUT OF STOCK

• Type: Antenna
• Color: Grey
• Specifications: Dimensions (mm): 700 x 135 x 73 mm (27.6" x 5.3" x 2.9") Weight: 5.9 kg (13 lb) Frequency Range: 5.15 - 5.85 GHz Gain: 18.6 - 19.1 dBi HPOL Beamwidth: 123° (6 dB) VPOL Beamwidth: 123° (6 dB) Electrical Beamwidth: 4° Electrical Downtilt: 2° Max. VSWR: 1.5:1 Wind Survivability: 200 km/h (125 mph) Wind Loading: 89 N @ 160 km/h (20 lbf @ 100 mph) Polarization: Dual-Linear Cross-pol Isolation: 28 dB Min. ETSI Specification: EN 302 326 DN2 Mounting: Universal Pole Mount, RocketM Bracket, and Weatherproof RF Jumpers Included
• Model #: AM-5G19-120

OUT OF STOCK

• Type: PoE Injector
• Specifications: Compatible OEM: Industry Standard Media Type: Copper Data Rate: 1Gbs Power Supply: 120V AC Power Cable Media Conversion Type: Copper to Copper Reach: 100m Type: POE Injector POE: POE++ Unmanaged IEEE Standard 802.3bt Additional Information Multi-Rate Connector1 Number of Ports: 1 Connector2 Number of Ports: 1 Connector Types: RJ-45 & RJ-45 POE Watts: 60W
• Model #: ADD-POEINJCT60W

OUT OF STOCK

• Type: PoE Adapter
• Specifications: Output Voltage: 24V DC @ 0.5A Input Voltage: 90-260V AC @ 47-63 Hz Input Current: 0.3A @ 120V AC, 0.2A @ 240V AC Efficiency: 75+% Output Ripple: 1% Max. Switching Frequency: 50 kHz 2-Pair Powering: Pins 4, 5 (+) and Pins 7, 8 (-) Operating Temperature: 0 ~ 40 degree Celsius (32 ~ 104 degree Fahrenheit) Storage Temperature: -30 ~ 70 degree Celsius (-22 ~ 158 degree Fahrenheit) Operating Humidity: 35 to 95% Non condensing Dimensions: 1.73" x 3.43" x 1.14" Weight: 0.22 lb.
• Model #: POE-24-12W-G

OUT OF STOCK

• Type: PoE Injector
• Specifications: PoE + Data Port (out): Supports half / full-duplex operation 10/100/1000BASE-T port IEEE 802.3 compliant IEEE 802.3u compliant IEEE 802.3at compliant IEEE 802.3af compliant IEEE 802.3ab compliant Data Port (in): Supports half / full-duplex operation IEEE 802.3 compliant IEEE 802.3u compliant IEEE 802.3ab compliant 10/100/1000BASE-T port LED Indicators: Blue: Power On Green: Link On Power: Power Adapter: 54 V / 0.6 A Max Consumption: 32.4 watts Output: 0.6 A at 54 V Temperature: Operating: 0 to 50 degree C (32 to 122 degree F) Storage: -30 to 70 degree C (-4 to 158 degree F) Humidity: Operating: 5% to 95% non-condensing Storage: 5% to 95% non-condensing
• Model #: DPE-301GI

OUT OF STOCK

• Type: PoE Midspan
• Color: Black
• Specifications: Data rate: 10/100/1000 Mbps Installation and management Power Selector: 15 W or 30 W Automatically detects PoE and High PoE-enabled devices and supplies inline power Local LED management display Input power AC Input Voltage: 100 to 240 V AC AC Frequency: 50-60 Hz Max. output power: 55 V DC (max. 60 W) Connectors Shielded RJ45, EIA 568A and 568B Power connector C13 Network
• Features: IEEE 802.3at 100 to 240 V AC Support for Axis PTZ domes Plug-and-play
• Model #: 5900-334

OUT OF STOCK

• Type: PoE Injector
• Specifications: Interface: "Data" Input Ports: 8 x RJ45 "Data + Power" Output Ports: 8 x RJ45 Management Port: 1 x RJ45; 10/100/1000BASE-T, auto-negotiation, auto-MDI/MDIX Data Rate: 10/100/1000Mbps LED System: SYS PWR x 1 (Green), PoE Failure x 1 (Red), Fan Failure x 2 (Red) Management port x 2: 1000 (Green), 10/100(Orange) Per PoE Port: Ultra 60W PoE-in-use x 1 (Green), 802.3at/af PoE-in-use x1 (Orange), PoE Power Usage LED x4 (Green) Power Requirements: 100 - 240V AC, 50/60 Hz, 6.5A Power Consumption: 520 watts (max.) / 1774BTU Ventilation: Fan x 3 Enclosure: Metal PoE Standard: IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus 4-pair Ultra PoE PoE Power Supply Type: End-span / Mid-span / UPoE (Ultra PoE) Power Pin Assignment: Pair 1 end-span: 1/2 (-), 3/6 (+) Pair 2 mid-span: 4/5 (+), 7/8 (-) UPoE: 1/2 (-), 3/...
• Model #: UPOE-800G

OUT OF STOCK

• Type: Device Server
• Specifications: Ports: 16 RS-232 serial ports Throughput: Up to 230 Kbps Signal Support: TXD, RXD, RTS, CTS, DTR, DSR, DCD Ethernet: Physical Layer: 10/100 Base-T Data Rate: 10/100 Mbps Mode: Full or Half duplex USB: 2 ports at .5A max per port Power Input: 100-240 VAC, 50-60 Hz, 0.4A Surge Protection: 1 kV burst (EFT) per EN61000-4-4; 2 kV surge transient per Security: SSL, SSL/TLS, SSHv2, FIPS 197 (serial ports), SNMPv2, PPP Dimensions: 17.00" x 6.95" x 1.62" Weight: 5.00 lbs.
• Model #: 70002388