Wired & Wireless Accessories

• Model #: STARWELL257710948737Lan

• Type: PoE Splitter
• Color: Black
• Specifications: Interface: "PoE (Power + Data)" Input Port : 1 x RJ-45 10/100/1000Base-T "Data" Out Port: 1 x RJ-45 10/100/1000Base-T DC Out Plug Connector: 1 removable 4-Pin terminal block LED Indicator: System: Power Ready x 1 (Green) Network Cable: 10/100/1000Base-T: 4-Pair UTP Cat. 5, 5e, 6 Distance up to 100m (328 ft.) EIA/TIA- 568 100-ohm STP (100m) Data Rate: 10/100/1000 Mbps (vary on Ethernet device attached) DIP Switch: 12V DC / 24V DC output voltage Power Input: 802.3at PoE 48~56V DC Power Output: 12V / 24V DC, max 2A (adjustable) Enclosure: IP30 metal case Installation: DIN rail kit and wall mount ear ESD / EFT Protection: 6 KV DC PoE Standard: IEEE 802.3at High Power over Ethernet Number of devices that can be powered: 1 or 2 (Vary on device's power requirement; DC1 + DC2 cannot be over 25 watts.) ...
• Model #: IPOE-162S

• Type: PoE Extender
• Color: Black
• Specifications: Ethernet Interface: Copper: 10/100BASE-TX RJ45 auto-negotiation / auto-MDI / MDI-X Power over Ethernet Standard: IEEE 802.3at/af PoE PSE (Power Source Equipment) PoE Output: 56V DC, 600mA max. PoE Budget: Up to 25 watts PoE Mode: End-span, RJ45 Pin 1/2 (+), 3/6 (-) Data Rate: 100/100 Mbps Cabling: Cat5e or above Maximum Distance: 100 meters Maximum Frame Size: 1522 bytes LED Indicators: 4 x LEDs PWR LRP LNK PoE-in-use LNK / ACT ESD Protection: 4KV DC Enclosure: Metal case Installation: Wall mount or DIN rail with optional kit Power Requirements: BNC Power over Coaxial Input: 44~56V DC Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af Power over Ethernet (802.3at Type 1) IEEE 802.3at Power over Ethernet Plus(802.3at Type 2)
• Model #: LRP-101CE

• Model #: 9359014205231

• Model #: STARWELL257710951898Lan

• Type: PoE Injector
• Specifications: Ethernet Interface: Copper: 10/100BASE-TX RJ45, auto-negotiation / auto-MDI / MDI-X Power over Ethernet Standard: IEEE 802.3at/af PoE PD (Powered Device) PoE Input: Supports both Mid-span and End-span PSE Input Range: 48~56V DC Data Rate: 100/100 Mbps Cabling: Cat5e or above Maximum Distance: 100 meters Maximum Frame Size: 1522 bytes LED Indicators: 4 x LEDs PWR LRP LNK PoE IN LNK / ACTESD Protection: 4 KV DC EFT Protection: 2 KV Enclosure Metal: case Installation: Wall mount or DIN rail with optional kit Power Requirements: RJ45 PoE Input: 802.3at/af 48~56V DC DC Input: 48~56V DCStandards Compliance: Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af Power over Ethernet (802.3at Type 1) IEEE 802.3at Power over Ethernet (802.3at Type 2)
• Model #: LRP-101CH

(7)

• Type: PoE Splitter
• Color: Black
• Specifications: Interface: 2 x 10/100/1000Mbps RJ45 Port AUTO Negotiation/AUTO MDI/MDIX 1 x POWER OUTPUT PORT Network Media 10BASE-T: UTP category 3, 4, 5 cable (Max 100m) EIA/TIA-568 100O STP (Max 100m) 100BASE-TX: UTP category 5, 5e cable (Max 100m) EIA/TIA-568 100O STP (Max 100m) 1000BASE-T: UTP category 5, 5e, 6 cable (Max 100m) Power Supply: 12VDC 1A, 9VDC 1A, 5VDC 2A Basic Function: Compatible With IEEE 802.3af Compliant PSEs Delivers Power Up To 100 Meters Optional 12VDC, 9VDC or 5VDC Power Output LED Indicator: PWR Dimensions: 3.2" x 2.0" x 0.9" Certification: FCC, CE, RoHS System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista or Windows 7, MAC OS, NetWare, UNIX or Linux. Environment Operating Temperature: 0°C - 40°C (32°F - 104°F) Storage Temperature: -40°C - 70°C (-40°F - 158°F) Opera...
• Model #: TL-POE10R

• Type: PoE Extender
• Specifications: Interfaces: PoE IN:1 x 10/100/1000BASE-T Ethernet with IEEE 802.3at PoE "Data + DC power" in auto MDI/MDI-X, auto-negotiation RJ45 connector PoE OUT: 2 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/802.3af PoE "Data + DC power" out auto MDI/MDI-X, auto-negotiation RJ45 connector Power over Ethernet PoE Standard: "PoE In" Port: IEEE 802.3at Power over Ethernet Plus end-span/mid-span PD class 4 PD Per "PoE Out" Port: IEEE 802.3at Power over Ethernet Plus end-span PSE IEEE 802.3af Power over Ethernet end-span PSE PoE Power Supply Type: End-span (Type A) PoE Power: "PoE In" Port: 52 - 56V DC, max. 30.8 watts Per "PoE Out" Port: 44 - 55V DC, max. 25 watts Power Pin Assignment: "PoE In" Port: 1/2 (+), 3/6 (-); 4/5 (+), 7/8 (-) Per "PoE Out" Port: 1/2 (+), 3/6 (-) Data Rate: 10/100/1000Mbps MAC Address Table: 2K Data Bu...
• Model #: POE-E202

• Type: PoE++ Injector
• Color: Black
• Specifications: Standards and Protocols: IEEE802.3i, IEEE802.3u, IEEE802.3ab, IEEE802.3af, IEEE802.3at, IEEE802.3bt Certification: FCC, CE, RoHS Environment: Operating Temperature: 0°C to 45°C (32°F to 113°F) Storage Temperature: -40°C to 70°C (-40°F to 158°F) Operating Humidity: 10% to 90%RH non-condensing Storage Humidity: 5% to 90%RH non-condensing Material: Metal Casing Network Media: 10BASE-T: UTP category 3, 4, 5 cable (maximum 100 m) EIA/TIA-568 100 ohm STP (maximum 100 m) 100BASE-TX: UTP category 5, 5e cable (maximum 100 m) EIA/TIA-568 100 ohm STP (maximum 100 m) 1000BASE-T: UTP category 5, 5e, 6 cable(maximum 100 m) Ports: 1 10/100/1000Mbps RJ45 data-in port 1 10/100/1000Mbps RJ45 power+data-out port 1 AC socket Power Consumption: Input: 100-240 V, 50/60 Hz, 1.6A Output: Auto-determine the necessary pow...
• Model #: TL-PoE170S

(4)

• Type: PoE Adapter
• Color: White
• Specifications: Interface: 2 x 10/100/1000Mbps RJ45 Port Auto Negotiation/Auto MDI/MDIX 1 100~240V / 50~60Hz AC Power Input Port Network Media 10BASE-T: UTP category 3, 4, 5 cable (Max 100m) EIA/TIA-568 100 ohms STP (Max 100m) 100BASE-TX: UTP category 5, 5e cable (Max 100m) EIA/TIA-568 100 ohms STP (Max 100m) 1000BASE-T: UTP category 5, 5e, 6 cable (Max 100m) LED Indicator : PWR Dimensions (W x D x H): 4.30" x 2.30" x 1.50" Environment Operating Temperature: 0?~40? (32?~104?) Storage Temperature: -40?~70? (-40?~158?) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing Package Contents 48V, 24W Passive PoE Adapter TL-POE4824G Power Cord Wall Mounting Kits
• Model #: TL-POE4824G

• Type: PoE Extender
• Color: Black
• Specifications: Network Connector: PoE In Port 1 x 10/100/1000BASE-T Ethernet with Ultra PoE "Data + DC" in, auto MDI / MDI-X, auto-negotiation RJ45 connector PoE Out Port 4 x 10/100/1000BASE-T Ethernet with IEEE 802.3at/802.3af PoE "Data + DC" out, auto MDI / MDI-X, auto-negotiation RJ45 connector Data Rate: 10/100/1000 Mbps Switch Architecture: Store-and-Forward MAC Address Table: 2K Data Buffer: 2 Mbits Switch Fabric: 10 Gbps Switch Throughput: 7.44 Mpps @ 64 bytes Jumbo Frame: 9K Flow Control: IEEE 802.3x pause frame for full duplex Back pressure for half duplex LED Indicators: PoE In Port 10/100 LNK / ACT (Orange), 1000 LNK / ACT (Green) PoE Out Port 1 to Port 4 10/100 LNK / ACT (Orange), 1000 LNK / ACT (Green) PoE-in-Use (Orange) PoE Max. (Orange) Protection: ESD (Ethernet): 6 KV Surge (EFT for powe...
• Model #: POE-E304

• Model #: GODSB0DNTGVZCT

• Brand: TRENDnet
• Part Number: TI-BE200
• Type: PoE Extender
• Specifications: Standards IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af IEEE 802.3at IEEE 802.3bt Standard Interface 1 x Gigabit PoE++ in port 1 x Gigabit PoE++ out port 1 x Gigabit PoE+ out port LED indicators Wall mount IP67 housing Data transfer rate Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex) Performance RAM buffer: 1Mb MAC Address Table: 2K entries Jumbo Frame: 9KB Certifications CE FCC IEC 61000-4-2 IEC 61000-4-4 IEC 61000-4-5 IEC 60068-2-27 (Shock) IEC 60068-2-32 (Free Fall) IEC 60068-2-6 (Vibration)
• Model #: TI-BE200

• Brand: TRENDnet
• Part Number: TI-BEP200
• Type: PoE Extender
• Specifications: Standards IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af IEEE 802.3at IEEE 802.3bt Device Interface 1 x Gigabit PoE++ in port 1 x Gigabit PoE+ out port 1 x Gigabit 24/48V DC passive PoE out port LED indicators Wall mount IP67 housing Data Transfer Rate Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Gigabit: 2000Mbps (full duplex) Performance RAM buffer: 1Mb MAC Address Table: 2K entries Jumbo Frame: 9KB DIP Switch Adjust 24/48V DC passive voltage (default 48V DC)
• Model #: TI-BEP200

• Type: POE+ Media Converter
• Specifications: Compatible OEM: Industry Standard Media Type: MMF or SMF Data Rate: 1Gbs Power Supply: 120V AC Power Cable Media Conversion Type: Copper to MMF or SMF Type: Media Converter POE+ Unmanaged IEEE Standard 802.3at Connector1 Number of Ports: 1 Connector2 Number of Ports: 1 Connector Types: RJ-45 & SFP POE Watts: 30W
• Model #: ADD-GMC-SFP-POE+

• Type: PoE Splitter
• Color: Black
• Specifications: Standards: IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af Device Interface: 1 x Gigabit data/power in port 1 x Gigabit data out port 1 x Power out port LED indicators Adjustable output power DIP switch (5 V, 7.5 V, 9 V, 12 V) Data Transfer Rate: Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex) Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) Gigabit: 2000 Mbps (full duplex) Jumper Cable: 2.0 to 2.0 mm 2.0 to 2.5 mm Power: PoE network cable input: 48 V DC, 0.38 A Output: 5 V (2 A), 7.5 V (2 A), 9 V (1.7 A), 12 V (1.2 A) Consumption: 0.3 Watts (max.)
• Model #: TPE-104GS

• Model #: STARWELL257710949215Lan

• Model #: 592395299010

• Type: PoE Extender
• Specifications: PoE Standard: IEEE 802.3af (Power over Ethernet) IEEE 802.3at (High Power over Ethernet) PoE Power Supply Type: Mid-Span / Type B PoE Power Output: 52V DC, 510 mA, Max. 26 watts Power Pin Assignment: 4/5 (+), 7/8 (-) Maximum Distance: 4 units, daisy-chain installation with 500m support Data Rate: 10/100/1000 Mbps Switch Architecture: Store-and-Forward Maximum Frame Size: 1552 Bytes Flow Control: Back pressure for half-duplex IEEE 802.3x pause frame for full-duplex LED Indicators: 1 x PoE IN (Green) 1 x LAN Data (Green) 1 x PoE OUT (Green) Power Requirements: IEEE 802.3at compliant with voltage within 52V-56V DC Power Consumption: 3.2 watts (system maximum)
• Model #: POE-E201

• Type: PoE Injector
• Specifications: Interface: Input Port: 1 x RJ45 STP Data In Output Port: 1 x RJ45 STP PoE (Data + Power) Out Input power terminal block: 1 Network Cable: Twisted-pair cable up to 100 meters (328 ft.) 10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6 100BASE-TX: 4-pair UTP Cat. 5, 5e, 6 1000BASE-T: 4-pair UTP Cat. 5e, 6 Data Rate: 10/100/1000 Mbps Dimensions: 1.26" x 5.31" x 3.46" Weight: 0.95 lb. Power Requirements: DC 48~56V, 2A max. Unit Output Voltage: DC 45~53V Power Consumption: 75 watts max. Standards Compliance: IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3bt 4-pair Power over Ethernet Type 3 IEEE 802.3at Power over Ethernet Plus IEEE 802.3af Power over Ethernet Package Contents: IPOE-171-60W User's manual Wall-mount kit Dust cap
• Model #: IPOE-171-60W

• Model #: STARWELL257710951430Lan

• Model #: R169239503389064

• Model #: R155239503388944

• Brand: YuLinca
• Part Number: PGN301-EU-NEW
• Primary Port Speed: 1000 megabits_per_second
• PoE Ports: 2 Port / 30W
• Model #: 830599172274

• Model #: R369239503390831

Limited time offer, ends 02/12

• Model #: 6019310689427ate30

• Type: PoE Extender
• Color: Black
• Specifications: Ethernet Interface: LRP-101CH Copper: 10/100BASE-TX RJ45, auto-negotiation / auto-MDI/MDI-X Power over Ethernet Standard: IEEE 802.3at/af PoE PD (Powered Device) PoE Input: Supports both Mid-span and End-span PSE Input Range: 48~56V DC Data Rate: 100/100 Mbps Cabling: Cat5e or above Maximum Distance: 100 meters Maximum Frame Size: 1522 bytes LRP-101CE Copper: 10/100BASE-TX RJ45, Auto-negotiation / auto-MDI/MDI-X Power over Ethernet Standard: IEEE 802.3at/af PoE PSE (Power Source Equipment) PoE Output: 56V DC, 600mA max. PoE Budget: Up to 25 watts PoE Mode: End-span, RJ45 Pin 1/2 (+), 3/6 (-) Data Rate: 100/100 Mbps Cabling: Cat5e or above Maximum Distance: 100 meters Maximum Frame Size: 1522 bytes LED Indicators: LRP-101CH 4 x LEDs PWR LRP LNK PoE IN LNK / ACT LRP-101CE 4 x LEDs PWR LRP LNK PoE-in-us...
• Model #: LRP-101C-KIT

• Model #: AG-607

• Brand: YuLinca
• Uplink Interface: RJ45
• Primary Ports: RJ45
• Primary Port Speed: 10 gigabits_per_second
• Model #: 725842971429

• Model #: STARWELL257710951836Lan

• Model #: R299239503390237

• Model #: R139239503388807

• Model #: STARWELL257710950136Lan

• Model #: 9359014210235

• Type: PoE Injector
• Color: Black
• Specifications: Standard: IEEE 802.3/3u/3ab, IEEE 802.3af Power over Ethernet 1 x 10/100/1000Mbps DATA-IN (Data only) 1 x 10/100/1000Mbps PWR+DATA OUT (Data + Power) Network Media: 10Mbps: UTP/STP Cat. 5 and 5e up to 100 Meters 100Mbps: UTP/STP Cat. 5, and 5e up to 100 Meters Gigabit: UTP/STP Cat 5e and 6 up to 100 meters Data Lines: Pair 1: Pin 1, 2 Pair 2: Pin 3, 6 Power: Input: 100~240V, 50~60Hz, 0.4A max. Output: 48V DC, 0.4A 18W max. Power Consumption: 15.4 Watts (max.) Dimensions (W x D x H): 70 x 45 x 25mm (2.75 x 1.8 x 1 in.) Weight: 45 g (1.6 oz.)
• Model #: TPE-113GI

• Model #: STARWELL257710950129Lan