Specifications: Material: Plastic outer shell
Output limitation (each port):
Addressable RGB port: 72 LED per port, total 5V, 5A
Fan Port : total 12V, 3A
Color Selection: Support 2812 IC Addressable RGB LED
Signal output:
Standard Addressable RGB 3pin + 4-1pin x 6*
Fan 4pin port x 4 (compatible with 3pin)
Included Parts:
6 x Standard Addressable RGB cable
1 x Peripheral power Y cable
1 x RF remote
1 x Thermal sensor cable
1 x Power switch cable
Specifications: Color: White
Material: Plastic strip with 15 LED(3.6W) and adhesive tape
Operating system support: 12V
Connectors:
Peripheral to LED 4pin connector x 1
4pin daisy chain connector x 1
Length: 300mm
Weight: 22g
Specifications: Adjustable Width from 5 to 9 inches
Base Plate Dimensions: 9.75" x 10" x 1"
Side Walls Dimensions: 9.75" x 3.5" x 1.12"
4x 1.5" Casters (2 with Double-Locking)
Metal Thickness: 1/16"
Maximum Weight Supported (without Wheels): 200lbs.
Maximum Weight Supported (with Wheels): 80lbs.
Padded Interior
Main Body Color: Beige
Wheel Color: Black
Weights: 5 lbs.
Package Includes:
Heavy Duty Beige Computer Tower Case Stand
4 Casters
6 Mounting Screws
1 Wrench for Easy Installation
Specifications: IMPORTANT NOTE: This vertical graphics card holder kit is designed for standard ATX chassis with at least 7 available PCI slots & You need to GIVE UP the access to these 7 PCI slots at the back panel of your chassis.
Specifications: Color: Black
Material: High density ABS / magnet
Application: 140mm fan grille and filter kit
Net Weight: 22g
Dimension: 140 mm(W) x 140 mm(H) x 3 mm (D)
Specifications: Color: Black
Material: High density ABS / magnet
Application: 120mm fan grille and filter kit
Net Weight: 0.02kg
Dimension: 120 mm(W) x 120 mm(L) x 3 mm (D)
Specifications: Material: 18 pcs 5050 RGB LED with magnetic strip and adhesive tape
Pin definition: +12V, G, R, B
Included Parts:
RGB LED strip x 2
Y cable x 2
Length: 300mm
Wattage: 1.44W (12V, 0.12A)
Tandem limits: 5 pcs on each line
Weight: 30g
Specifications: Color: Black
Material: ABS
Application: 80mm fan grille and filter kit
Dimension: 80 mm(W) x 80 mm(H) x 3 mm (D)
The FF81B is a fan grille designed for easy installation with any 80mm fan. The honeycomb pattern on the grille not only reduces wind shear noise but also channels the airflow into more focused beam. Its integrated filter also provides reduced dust buildup to extend the life cycle of components. All in all, the FF81 is an excellent upgrade for any 80mm fans in your system.
Specifications: Weight Capacity: 50 lbs (22.7 kg)
Maximum CPU Dimensions: 18" x 8.5" (457 x 216 mm)
Minimum CPU Dimensions: 9.4" x 2.6" (239 x 66 mm)
Mounting Options: Directly to wall; under desk; to Ergotron Wall Track (interface bracket required, 97-091); to Ergotron Command Post (interface bracket required, 60-366); to 2" round pole (interface bracket required, 60-131-003); on Ergotron Mobile WorkStand Cart (interface bracket required, 60-131-003); on Ergotron LX Large Display Cart or Neo-Flex Mobile MediaCenter; on Neo-Flex Laptop and LCD Carts; on StyleView SV40/41/SV42 EMR Carts and StyleView SV32 PHD Carts
Specifications: Description: Vertical Small CPU Holder (black)
Includes CPU holder, bumpers
CPU Size Range: 1-3/8" to 3-3/4" (35 to 95 mm) wide; accommodates most small form factor and ultra small form factor CPUs
Weight Capacity: 50.00 lbs.
Mounting Options: Mounts to sturdy vertical surfaces. Where applicable, attach to wood stud. To increase support, a Wall Track accessory (ordered separately) is recommended
Specifications: 120mm Ultra Fine Fan Filter with Magnet (Black)Color: Black,Material: PVC/magnetApplication: 120mm size filterNet Weight: 13.6gDimension: 120mm (W) x 120mm (H) x 1.5mm (D)