Specification: LED Type: Digital-RGB LED strip hard board (+5V, data, empty, Ground)
LED strip length: 65.9 mm
Number of LEDs: 2x 5pcs
Input Voltage: +5V
Current (Single strip) Max: 0.15A
Current (Dual Strip) Max: 0.3A
Wattage (Single strip) Max: 0.75W
Wattage (Dual Strip) Max: 1.5W
Copper Base Dimension (WxDxH): 60.2 x 51 x 3.7mm (2.37 x 2 x 0.15in)
Copper Thickness: 3.7 mm
Fin Construction: 0.08 mm fin gap / 0.08mm thickness
Materials: Acrylic / POM / Copper
Aluminum Cover
Fitting: Nickel Plated Brass
Fitting Insert: ABS
Supported Tube Size Hard Tube: OD 16mm
Soft Tube: OD 16mm; ID 10mm
Tube Compatibility Hard Tube: PETG, Acrylic Tube
Soft Tube: PVC Tube
Features: Designed for M.2 SSD: The NVME Heat Sink is specially designed for M.2 2280 SSD, which is very suitable for Laptop, Desktop Computers/PS5, etc.
10-30°C Cooling Effect: Pure Copper coverd by Graphite, Copper(401 W/mK) has better heat dissipation than aluminum alloy(237W/mk), and the groove design greatly increase the heat dissipation area, with 10°C - 30°C cooling effect (Varies depending on the environments), cool your M.2 SSD to a safe temp to avoid overheating and throttling, improving the performance of your computer.
Comes with Thermal Pad, Rubber Rings and bandages: thermal pad is made from Silicon Grease Material, with good thermal conductivity ability. Soft enough and good ductility, compatible with uneven surfaces of the M.2 SSD. Low viscosity, with no damage to the SSD warranty label. The bandages can bear...
Features: 10 pcs of 11x11x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape
Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc.
Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface.
The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface
Excellent adhesive performance with good wetting and flow onto many substrate surfaces. T...
Features: 10 pcs of 8.8x8.8x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape
Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc.
Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface.
The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface
Excellent adhesive performance with good wetting and flow onto many substrate surfaces....
Features: 5 pcs of 14x14x6mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape
Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc.
Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface.
The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface
Excellent adhesive performance with good wetting and flow onto many substrate surfaces. Th...