Network Interface: USER INTERFACE:
Indicator LEDs: Outputs, inputs, communication link and power
Controls: EDID setup button, 12 setup DIP switches
1 RS-232: On a Mini–USB female connector for firmware upgrade
S-Video: VIDEO:
Max. Data Rate: 10.2Gbps (3.4Gbps per graphic channel)
Max. Resolution: Up to 4K@60Hz (4:2:0) 24bpp
Standards Compliance: Supports HDCP 1.4 and HDBaseT 1.0
HDMI Support: Deep Color, x.v.Color™, Lip Sync, 7.1 PCM, Dolby TrueHD, DTS–HD, 2K, 4K, and 3D as specified in HDMI 2.0
Resolution Support: Up to 4K@35m (Cat 5e/6) / 40m (Cat 6a); 1080p@60m (Cat 5e/6) / 70m (Cat 6a)
*4K supported:
4096 x 2160 / 3840 x 2160 @ 60Hz (4:2:0); 4096 x 2160 / 3840 x 2160 @ 30Hz (4:4:4)
Power Supply: VE802R
Connectors: 1 x DC Jack (Black) with locking
Consumption: DC 5V, 4W
VE802T
Connectors: 1 x DC Jack (Black) with locking
Consumption: DC 5V, 3.6W
Feature: The VE802 HDMI HDBaseT-Lite Extender extends an HDBaseT signal up to 70m from the HDBaseT source using one Cat 5e/6/6a cable. VE802 supports RS-232 and IR signaling passthrough, allowing you to control the HDMI source device from the remote unit (VE802R) while also granting access to the HDMI display device from the local unit (VE802T). IR signals can also be extended in both directions. The VE802 features Power over HDBaseT (POH) which can send power over Cat 5e/6/6a cable without an add...
Specification: Switches
DIP: 1 x Auto Switch ON / OFF
Video Input
Interfaces: 8 x HDMI Type A Female (Black)
Impedance: 100 ohm
Max. Distance: 5M at 4096 x 2160 / 3840 x 2160 @ 60Hz (4:4:4)
Video Output
Interfaces: 1 x HDMI Type A Female (Black)
Impedance: 100 ohm
Max. Distance: 5M at 4096 x 2160 / 3840 x 2160 @ 60Hz (4:4:4)
Video
Max. Data Rate: 18 Gbps (6 Gbps Per Lane)
Max. Pixel Clock: 600 MHz
Compliance:
- HDMI 2.0 (3D, Deep Color)
- HDCP 2.2
- Consumer Electronics Control (CEC)
Max. Resolution: Up to 4096 x 2160 / 3840 x 2160 @ 60Hz (4:4:4)
Max. Distance: 5M at 4096 x 2160 / 3840 x 2160 @ 60Hz (4:4:4)
Control
RS-232:
- Connector: 1 x DB-9 Female (Black)
- Baud Rate: 19200, Data Bits: 8, Stop Bits:1, Parity: No, Flow Control: No
IR: 1 x Mini Stereo Jack Female (Black)
Connectors
Power: 1 x DC Jack (with locking)
...
Specification: OVERVIEW
Display Style: Extender
Model Type: VGA
Cable Types: CAT5/CAT5E
PHYSICAL
Included Mounting Accessories: Yes
ENVIRONMENTAL
Operating Temperature Range: 0 to 40 C (32 to 104 F)
Storage Temperature Range: -20 to 60 C (-4 to 140 F)
Relative Humidity: 20 to 90%
CONNECTIONS
Connector A: HDMI (FEMALE) (X4)
Connector B: RJ45 (FEMALE) (X4)
Feature: Tripp Lite's B126-4X4 HDMI over Cat5/6 Matrix Splitter Switch and Transmitter Unit allows you to share high-definition video and audio from four HDMI-enabled digital video components (e.g., DVR, Cable Box, Blu-Ray, HD gaming consoles, etc.) to four different monitors. When used with Tripp Lite Active HDMI receivers, it can extend
Power Consumption: Sender: 10W maximum
Receiver: 20W maximum
Power Supply: Sender: 5V DC 2.6A, locking
Receiver: 5V DC 4A, locking
Specification: Maximum Pixel Clock: 165 MHz
Video Input Connector (Sender): (1) DVI 29-pin, female, digital only
Video Local Output Connector (Sender): (1) DVI 29-pin, female, digital only
Video Output Connector (Receiver): (1) DVI 29-pin, female, digital only
Line Input (Sender): (1) 3.5mm mini-stereo jack
Line Output (Receiver): (1) 3.5mm mini-stereo jack
USB Host Interface (Sender): (1) USB Type B, female
USB Device Connectors (Receiver): (4) USB Type A, female
RS-232 Connector (Sender): 1) DB-9, female
RS-232 Connector (Receiver): (1) DB-9, male
Ethernet connector (Sender): (1) RJ-45, female
Ethernet connectors (Receiver): (3) RJ-45, female
Mode button (Sender): (1) tact-type
+ / USB button (Receiver): (1) tact-type
-...