Specifications: Screen: <= 34.00"
Lift: 13.00" (33.00 cm)
Tilt Range: 70 degrees backward, 5 degrees forward
Pan: 360 degress
Rotation: 360 degrees
VESA: MIS-D
Mounting Options: Desk Clamp attaches to surface edge 0.40" to 2.40" (10.00 to 60.00 mm) thick; Grommet Mount attaches through surface holes 0.31" to 2.00" (8.00 to 50.00 mm) wide and up to 2.25" (57.00 mm) thick
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100.00 x 100.00 mm & 75.00 x 75.00 mm)
Weight Capacity: 7.00 to 25.00 lbs. (3.20 to 11.30 kg). With monitors greater than 20.00 lbs. (9.10 kg) in weight, the vertical range of motion may be reduced up to 4.50" (11.00 cm) for a total height range of 8.50" (22.00 cm)
Note: If installed on WorkFit-T or WorkFit-TL, maximum allowable monitor weight is reduced to 14.00 l...
Specifications: Weight Capacity: Total load on height-adjustment assembly = 50 lbs (22 kg). Includes contents of Worksurface, Cable Storage Box and LCD Pivots. LCD Pivot capacity = 6–14 lbs (2.7–6.4 kg) per display, 12–28 lbs (5.4–12.7 kg) for both displays
Mounting Standards: VESA FDMI, MIS-D, 75/100 (hole patterns = 100 x 100 mm and 75 x 75 mm)
Displays can be mounted on cart in 5 different height positions
Install displays at 3.5° or 8.5° upward angle for optimized viewing conditions. Displays are not tilt adjustable
CPUs attach safely to rear of cart with CPU Holder: Adjusts from 12"H x 3"D to 18"H x 8.5"D (30 x 8 cm to 46 x 22 cm)
CPU Holder capacity: 40 lbs (18 kg)
Cable Storage Box and space within the center column can conceal and route cords, wiring and power bricks
Barcode scanner holder provides easy access to ...
Specifications: Device Supported: Flat Panel Display
Maximum Load Capacity: 25.00 lb
Maximum Screen Size Supported: 42"
Color: Polished Aluminum
VESA Mount Compatible: Yes
VESA Mount Standard: 75 x 75, 100 x 100, 200 x 100, 200 x 200
Height: 20.0"
Depth: 33.0"
Weight (Approximate): 11.00 lb
Specifications: Display size is dependent on overall configuration of the DS100 Stand; observe balance requirements to prevent tipping
Mounting Standards: VESA FDMI, MIS-D, 75/100, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Attaches to DS100 Pole only; cannot attach to DS100 Crossbar
Specifications: Supports two displays between 15.00" - 24.00" with maximum weight 26.00 lbs. per display
Flexibility to tilt up and down +/- 20 degree
Swivel displays side to side +/- 20 degree
Rotate 90 degree for landscape or portrait mode
Hole pitch 100 mm x 100 mm VESA and 75.00 mm x 75.00 mm VESA
Specifications: Wall Track is a low-cost, zero-footprint mounting system that attaches to most vertical surfaces. It accommodates an entire computer workstation.
Separately-ordered brackets are required to attach components to Wall Track (view + Accessories). The height of components can be adjusted by loosening set-screws on these brackets.
Description: 42" Wall Track (aluminum) with cable management channel covers
Dimensions: 42" x 5" x .87" (1067 x 127 x 22 mm)
OSHPD Pre-approval Number OPA-0620
Fasteners for attaching to wall not included. Fasteners may be purchased from Ergotron: part number 97-531 for metal or wood studs; part number 90-011 for hollow walls
Separately-order brackets required to attach Ergotron components: part number 97-091 for LX & MX Arms, Neo-Flex Wall Mounts, 400, 200 and 100 Series Arms and Pivot...
Specifications: Weight Capacity:
Display = 6 - 18 lbs. (2.7 - 8.2kg) or up to 25 lbs (11.4kg) with tilt and lift lock-out features engaged
keyboard, mouse and barcode scanner = 4 lbs (1.8kg)
CPU = 50 lbs (22.7kg)
Lift: 25" (64cm)
Tilt: Up +25 degree/ Down -5 degree
Mounting Pattern: VESA FDMI, MIS-D, 75/100, C (hole patterns = 100 x 100 mm and 75 x 75 mm)
Pan: 360 degree
Rotation: 360 degree
Keyboard Tray Dimensions: 18.6" x 9" (47.2 x 22.8cm)
CPU Dimension: 1-3/8" to 3-3/4" (35 to 95mm) wide; accommodates most small form factor and ultra small form factor CPUs
Monitor Size: Up to 24"