Newegg.com - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Specifications: Interface: IDE to SATA
Cable Length: 18.11" (460mm)
Features: Converts IDE Devices (Hard Drive, CD-ROM, CD-RW, DVD ROM, DVD + RW, etc…) to Serial ATA Connection
Supports ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, and IDE Devices
Compliant with ATA Specifications
Compliant with Serial ATA Gen 1.0
1 IDE Input Port
1 SATA Output Port
Specifications: Suitability: All SATA devices
Interface: 7 + 15 pin SATA
OS Compatibility: Windows 98SE/ME/2000/XP/Vista
Features: SATA to IDE Bridge Board
Convert all SATA devices to IDE
Support all SATA devices (H.D.D./DVD/CD-ROM, etc.)
Data transfer rate up to 3.0 Gbps
Two LED indicators for "power on" (green) and "HDD" (Red)
Features: Unique bi-directional SATA – IDE converter
Supports 3.5-inch SATA and IDE (ATA) hard drive
Supports 5.25-inch SATA and IDE (ATA) optical drives
Power-On and HDD-Activity LED indicators
Ultra low power consumption
Connectors: one IDE (ATA) connector, one SATA host connector (Yellow), one SATA device connector (Black) and one 4-pin FDD power connector
Two independent Ultra ATA channels with 128/256 bytes buffer per channel
Driverless. No driver is needed
Serial ATA Interface
Complies with SATA 1.0a specification
Supports SATA Generation 1 with transfer rate up to 1.5Gbps (150MB/s)
Supports Spread Spectrum in receiver
Supports SATA power saving mode: Partial and Slumber
IDE (ATA) Interface
Complies with ATA Specification
Complies with Ultra ATA 133 with transfer rate up to 133MB/s
Supports PIO mode o, 1, 2, 3, 4, 5, ...
1 x 44-pin IDE Female Input Port
1 x 40-pin IDE Male Output Ports
Use: Connects your 2.5in notebook IDE hard drive to a 40-pin IDE cable
Features: Works for ALL LAPTOPS HARD DRIVE including DELL, SONY, IBM, Toshiba, HP, COMPAQ, Fujitsu and much more
Easily create Ghost images of your laptop (keep in mind that it is much harder to create Ghost Images from laptop itself)
Transfer data from laptop drive to a desktop drive the quickest way
The best accessory for laptop data backup and recovery
This adapter allows you to connect a laptop hard drive to a desktop IDE cable. The laptop hard drive can then be detected and used as a regular IDE drive.
Please be careful of the direction of fitting RCW-616 to your ATA device. You could bend and damage the pins on it by i...
1 x 40 pin IDE connector for host connection
1 x 7+15pins Serial ATA port for SATA hard drive
1 x 4-pin power connector
Features: Converts IDE connector for Serial ATA Drive
Compatible with Ultra ATA 100/133 with Data transfer rate up to 1.5 Gbps (150 MB/s)
No Driver required
Supports SATA devices such as CD/DVD Drives, CD/DVD Burners....)
Supports up to 2 channels & 2 devices
With no Jumpers, makes it easy for configuration
Specifications: • Standard 2.5" SATA storage device form factor (100.2mm x 69.9mm x 9.8mm)
• LED indicators: Power On, Card Detect, and Disk Activity
• Can be a primary bootable device containing the OS and applications (depends on CF card specifications)
• Transparent to operating system and does not require any drivers
• Supports Microsoft Windows 2000, XP 32/64-bit, Server 2003 32/64-bit, Vista 32/64-bit, Server 2008 32/64-bit and Linux operating systems
• Powered by 7-pin SATA connector (SATA mode), or by USB connector (USB mode)
• Supports external application as removable USB mass storage device (USB mode)
• 7+15 pins SATA data and power male connector
• Complies with Serial ATA 1.0a specification
• Supports SATA II (3.0Gbps) host interface
• Supports SATA hot swap (depends on SATA host controlle...
Specifications: IDE Device to Serial ATA Device.
ALL EIDE Type DVD / DVD-RAM / CD-ROM / CD-RW / HDD Become New Serial ATA Devices.
Attaches this Mini Dangle board to the back of all types of ATAPI, ATA/133, ATA/100, ATA/66, ATA/33, EIDE and IDE storage devices (such as Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW, MO) and make them become new Serial ATA Devices and meet SATA standard.
OS Support: 100% hardware bridge converter to support PC (Windows98/SE/ME/2000/XP/ Vista), MAC OS 8.6~9.0 and Linux environment.
Features: Can Attaches to any type of ATAPI, ATA/133/100/66/33, EIDE and IDE storage devices (DVD, DVD-RAM, MO, CD-ROM, CD-RW, Hard Disk)
Mini Board size (59mm x 25mm), No space wasted
Compliant with Serial ATA 1.0a specifications and High transfer rate of 1.5Gbps
Supports Spread Spectrum in receiver