Hard Drive Adapters

• Type: M.2 port (M key) into one PCIe x4
• External Ports: M.2 (NGFF)
• Internal Ports: PCI Express x 4 via full size x 16 pinout
• Operating Systems Supported: • A computer and BIOS (usually set to AHCI) compatible with NVMe SSD over PCIe lanes. • Windows 7 with Microsoft’s Hotfixes for NVMe SSD. • Windows 8 and above. • Linux. • If after installation you get a yellow exclamation mark under the Device Manager, you may need to get an additional driver
• Model #: EC-PCIE

• Part Number: EC-SSHD
• Color: N/A
• Cable Length: 4 In
• Changer Type: USB 3.0 to SSD/2.5''
• Model #: EC-SSHD

Limited time offer, ends 07/24

• Model #: A-E01

• Model #: DZ-ZHT-273

• Color: Black
• Conversion Tray: 2 x 2.5" Drive to 3.5" Bay
• Compatible Products: 3.5"
• Model #: BK-HDCC

Limited time offer, ends 06/30

• Package Contents: 1 x Mounting All Screws Needed, 1x 4 Pin to Dual 15 Pin SATA Power Cable 2x SATA Data Cables( 18 inch),one is straight to straight, the order is straight to 90 degree
• Model #: 2X25TO35MAKIT

Limited time offer, ends 06/30

• Model #: SATA2IDE12

Limited time offer, ends 06/30

• Specifications: Fits in Standard 5.25 inch Driver Bay and may not fit in chassis with customized Bay Please ensure the 5.25 inch Driver Bay of your computer is standard size before ordering this item. - 1x 3.5 - inch Drive and 1x 2.5 - inch Drive could Mounted to this ITEM at the Same Time. However Mounting only ONE drive is recommended for heat dissipation. What's in the Box 4 x Rubber Washer 8 x Mounting Screws included
• Model #: 321002

Limited time offer, ends 06/30

• Type: SATA Expansion Card
• Specifications: Converts Serial ATA to Parallel ATA Supports ATA 100/133 Fit for 3.5/2.5 SATA HDD DVD. One 40pin IDE port. One Serial ATA port. One 4pin power connector. Chipset : JM20330
• Features: SATA to IDE Adapter ("Convert SATA Hard Drive to IDE Hard Drive") Connect a SATA hard drive to you IDE motherboard with this SATA to IDE Adapter Turn your SATA hard drive into IDE interface hard drive Features the JMicro JM20330 chipset Compliant with SATA specification and supports up to 2TB hard drives
• Package Contents: 1x bridge board
• Model #: 11-001-170

• Cable Length: 40cm
• Changer Type: USB to SATA
• Specifications: 5Gbps
• Connector A: USB 3.0
• Model #: E000133-4

• Type: PCI Express to M.2 Card
• External Ports: M.2 PCIE Key M Interface + M.2 SATA Key B Interface
• Internal Ports: PCIE X4 Interface + SATA III Interface
• Data Transfer Rate: PCIE 4.0X4/SATAIII
• Model #: PA12-HS10

• Changer Type: SATA
• Specifications: SATA 15 Pin male to Molex 4 pin female adaptor Easy migration to SATA power Convert an existing SATA power connector to molex power connector
• Model #: SATA-FM

Limited time offer, ends 06/29

• Thunderbolt 3: NO
• Model #: DUL-NVTPCE8X

Limited time offer, ends 06/30

• Specifications: Compatible with 2.5" SSD or HDD Allows a standard desktop or server without 2.5" bays to accomodate slim SSD or HDD. Coverts 3.5" drive bay into 2.5" drive bays to support 2.5" based SSD or hard drives. With Drive Screws and Adapter Case Screws with SATA data cable and power cable
• Package Contents: 2.5 to 3.5 HDD adapter, 18 inch SATA Data cable,6 inch Molex 4Pin to SATA 15pin power cable, screws bag
• Model #: KIT-2.5-3.5-MA

Limited time offer, ends 07/05

• Color: Black
• Conversion Tray: Compatible with Any 2.5 to 3.5 Drive Bay
• Mobile Rack Drives Support: 1 x 2.5" Drive to 3.5" Bay
• Mobile Rack Interface: SATA I/II/III
• Model #: BL-YPZJ01

• Color: Black
• Changer Type: IDE to SATA with ODD Support
• Connector A: IDE 40-Pin
• Connector B: SATA
• Model #: IDE2SAT2

Limited time offer, ends 07/24

• Color: Black
• Changer Type: USB to IDE&SATA
• Specifications: All in One Solution to Connect to Different Types of Interface's Hard Drive This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1. Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW. Compatible with Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS etc. Data Transfer Rate: up to 5Gb/s (10 times faster than USB 2.0). Supports drives with a capacity of up to 6TB. Backward compatible with USB 2.0/1.1. DC Power Supply 12V included for 3.5" devices. On/Off Switch for HDD protection. Pluy & Play, reliable and stable.
• Package Contents: All in One Soluti...
• Model #: W-E19-1

Limited time offer, ends 06/29

• Type: NVME to PCIe 4.0
• Model #: 4NV2PCE16X-PRO

• Parts: 3 Years
• Model #: EC-P3X4

• Type: U.2 to PCI Express
• Model #: PU41

Limited time offer, ends 06/30

• Specifications: Compatible : for Intel wireless card: half wlan/WIFI/WIRELESS PCI-E CARD 6250agx 6250anx 5150anx 5300agn 5100an wifi link 1000 for Atheros wireless card: half wlan/WIFI/WIRELESS PCI-E CARD ar9280 ar9287 ar9285 ar9283 ar9281 for Broadcom wireless card: half wlan/WIFI/WIRELESS PCI-E CARD bcm4322 bcm4321 bcm4312 bcm4312 and bcm92070 combo for Dell wireless card: half wlan/WIFI/WIRELESS PCI-E CARD 1520,1510 ,1515 1505 1501 1397
• Package Contents: 1 x Half to Full Size Mini PCIe bracket 4 x Screws
• Model #: MINIPCIE-AD

• Color: Red
• Specifications: Connect a PCIe M.2 SSD (NVMe or AHCI) to your computer through PCI Express for ultra-fast data access x4 PCI Express to M.2 PCIe SSD Adapter M.2 NGFF SSD (NVMe or AHCI) Adapter Card x4 PCIe expansion card Expansion bay adapter supports M key M.2 NGFF PCIe SSD Add a high speed 4-lane M.2 NGFF SSD such as Samsung 950 Pro or Samsung SM 951 to your PC Wide compatibility with M.2 SSDs (NVMe and AHCI): 110mm, 80mm, 60mm and 42mm OS independent for fast and easy set-up
• Connector A: 1 x M.2 (NGFF, M-Key, PCIe x4)
• Connector B: 1 x PCI Express x4 Male
• Model #: PEX4M2E1

• Model #: N2-M2-SSD-DUPLICATOR

• Specifications: Fits in Standard 5.25 inch Driver Bay and may not fit in chassis with customized Bay Please ensure the 5.25 inch Driver Bay of your computer is standard size before ordering this item. - 1x 3.5 - inch Drive and 1x 2.5 - inch Drive could Mounted to this ITEM at the Same Time. However Mounting only ONE drive is recommended for heat dissipation. What's in the Box 4 x Rubber Washer 8 x Mounting Screws included
• Model #: DZ-SSDZJ-002-A

Limited time offer, ends 06/29

• Type: Controller Card
• Model #: 4P-NVTPCE16X2

Limited time offer, ends 07/24

• Color: Black
• Conversion Tray: 2.5" & 3.5"
• Mobile Rack Drives Support: 2.5" & 3.5"
• Mobile Rack Interface: SATA I/II/III
• Model #: E-E01-8

• Color: Black
• Specifications: Mount both PCIe (NVMe) and SATA based M.2 SSDs inside your computer using this PCI Express adapter card 3 Port M.2 SSD (NGFF) Adapter Card / 1 x PCIe (NVMe) M.2 / 2 x SATA III M.2 / PCIe 3.0 PCI Express 3.0 M.2 NGFF Card Easily expand the storage and improve the overall performance of your desktop or server Supports PCI Express 3.0 (x4) ideal for a high-performance M.2 PCIe SSD (NVMe) OS independent with no drivers required for a fast hassle-free set up Includes a low-profile bracket
• Connector A: Connector Type(s): 1 x PCI Express x4 Male
• Connector B: Internal Ports: 3 x M.2 (NGFF, B-Key) Receptacle / 2 x SATA (7 pin; Data) Plug
• Model #: PEXM2SAT32N1

Limited time offer, ends 07/24

• Color: Black
• Changer Type: USB to IDE&SATA
• Specifications: All in One Solution to Connect to Different Types of Interface's Hard Drive This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1. Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW. Compatible with Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS etc. Data Transfer Rate: up to 5Gb/s (10 times faster than USB 2.0). Supports drives with a capacity of up to 6TB. Backward compatible with USB 2.0/1.1. DC Power Supply 12V included for 3.5" devices. On/Off Switch for HDD protection. Pluy & Play, reliable and stable.
• Package Contents: All in One Soluti...
• Model #: E-E02-4

• Model #: JEYI SK4

Limited time offer, ends 07/24

• Brand: LUOM
• Color: Black
• Changer Type: USB to IDE&SATA
• Specifications: All in One Solution to Connect to Different Types of Interface's Hard Drive This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1. Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW. Compatible with Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS etc. Data Transfer Rate: up to 5Gb/s (10 times faster than USB 2.0). Supports drives with a capacity of up to 6TB. Backward compatible with USB 2.0/1.1. DC Power Supply 12V included for 3.5" devices. On/Off Switch for HDD protection. Pluy & Play, reliable and stable.
• Model #: J-SA28-4

• Color: Other
• Changer Type: 9 Pin Serial Male to 10 Pin Motherboard Header
• Specifications: Color: Gray Connector A: 1 - DB-9 (9 pin; D-Sub) Male Connector B: 1 - IDC (10 pin; Motherboard Header) Female Cable Length: 15.98 in [406 mm] *Conforms to Apex10-Everex-Intel Specification, please refer to wiring diagram on the Downloads Tab
• Weight: 0.08
• Model #: PLATE9M16

Limited time offer, ends 07/04

• Color: Black
• Changer Type: IDE SATA to USB 3.0
• Specifications: sata and ide to usb adapter support 2.5"/3.5" SATA HDD/SSD, 2.5"/3.5" IDE, SATA/IDE Internal Blu-ray Drive. Hard drive converter is retrieve old files, backup, cloning and data recovery device tools. This converter allowing connect to three hard disk drives simultaneously
• Features: High Speed Data Transfer: This hard drive reader enables data transfer rates of up to USB 3.0, data transfer is super simple and easy. The different hard drive enjoys different data transfer speed, SATA SSD could reach up to 5Gbps, SATA HDD reach up to 100MB/s, IDE hard drive could
• Model #: E01IDE#Q0132_B

Limited time offer, ends 06/29

• Type: PCI Express to M.2 Card
• External USB Ports: PCI Express
• Compatibility: Apply to 2280 / 2260 / 2242 / 2230mm PCI-e m.2 NVMe SSD (NOT supported B/B+M Key M.2 NGFF SSD)
• Specifications: Compatibility with: Apply to 2280/2260/2242 / 2230mm M.2 PCI-e NVMe SSD (Not supported SATA-based M.2 SSD). PCIe NVMe/AHCI SSD (Incomplete List): Samsung XP941, SM951 (NVMe), 950 Pro Series SSDs, PM961, 960EVO, SM961, PM951, 960EVO. INTEL 600P. Liteon T10. Kingston HyperX Predator M.2. Plextor M6e Series M.2 SSD.
• Model #: M2T16X-BD

• Model #: B3EN-S1711

• Color: Black
• Changer Type: Compact Flash Card to IDE
• Specifications: This product does not support hot-swapping of flash cards while the PC is powered on. You must turn-off your computer to switch cards.
• Model #: 35BAYCF2IDE

• Model #: ZTC-EN005

• Model #: SA-022-CC

Limited time offer, ends 07/24

• Color: Black
• Changer Type: USB to IDE&SATA
• Specifications: All in One Solution to Connect to Different Types of Interface's Hard Drive This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1. Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW. Compatible with Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS etc. Data Transfer Rate: up to 5Gb/s (10 times faster than USB 2.0). Supports drives with a capacity of up to 6TB. Backward compatible with USB 2.0/1.1. DC Power Supply 12V included for 3.5" devices. On/Off Switch for HDD protection. Pluy & Play, reliable and stable.
• Package Contents: All in One Soluti...
• Model #: W-E02-1

• Specifications: Jmicro JM20330 Chipset Plug & Play and Hot-swapping capability Automatic SATA 3.0/1.5 Gbps speed negotiation Serial-ATA 1.0 specification compliant ATA/ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133 and 150Mbps Support ATA PIO and UDMA modes 0 to 4 Support 3.5" IDE hard drives and 5.25" optical drives Ultra low power consumption Master/Slave mode support Support Windows 98SE/ME/2000/XP Operating System
• Package Contents: SATA to ATA/ATAPI IDE Interface Adaptor SATA Cable Power Cable
• Parts: 3 years limited
• Labor: 3 years limited
• Model #: SY-JM-SIDE

• Model #: C2AG-1115-12

• Model #: CNS8J-00-B07Z1-1

• Color: Black
• Specifications: Connector Types: 1 - IDE 40 pin Male Connector Types: 1 - SATA Data 7 pin Plug Connector Types: 1 - SATA Power Plug Connector Types: 1 - SP4 Male Enclosure Type: Steel LBA support: 48-bit Product Height: 1.02 in [26 mm] Product Length: 3.98 in [101 mm] Product Weight: 3.67 oz [104 g] Product Width: 3.07 in [78 mm] Humidity: 8% ~ 90% RH Operating Temperature: 5°C to 80°C (41°F to 176°F) Storage Temperature: -40°C to 70°C (-40°F to 158°F) Chipset ID: JMicron JM20330 OS Compatibility: OS independent; No software or drivers required
• Weight: 0.47
• Model #: SAT2IDEADP

• Type: Cable
• Length: 20 cm
• Connector Detail: 4 Pin Molex
• Model #: MLX-STA01

Limited time offer, ends 07/22

• Brand: Heretom
• Color: 3.5" Drive Tray Caddy
• Dimensions: 17.0 in x 12.0 in x 3.5 in
• Weight: 0.068 kilograms
• Model #:

• Model #: 9469881938191

• Color: Green
• Changer Type: SATA to IDE
• Model #: SS-IDESATA

• Model #: C2AG-0121-CC1

• Color: Black
• Specifications: 2.5in & 3.5in Drive Connectors 1 - SATA (7 pin; Data) Receptacle Host Connectors 1 - mSATA (52 pin; Mini SATA) Male Max Drive Capacity Currently tested with up to 4TB 7200 RPM hard drive Type and Rate SATA III (6 Gbps)
• Connector A: mSATA
• Connector B: SATA
• Model #: MSAT2SAT3

• Model #: 28XYK-00-B07NS-1

Limited time offer, ends 06/29

• Brand: SoNNeT
• Series: NV2E-20GH
• Part Number: NV2E-20GH
• Color: Black
• Model #: NV2E-20GH

• Brand: TRENDnet
• Model: TU-IDES
• Changer Type: IDE to SATA
• Specifications: Standard ATA 33/66/100/133, SATA 1.0 Supported OS Any OS that supports ATA and SATA Input 7-pin female SATA data connector 4-pin power connector Output 40-pin IDE female connector to IDE device Power Consumption 78 mA Temperature -20ºC to 60ºC (-4ºF to 140ºF) Humidity 0~90%, Non-Condensing Certification FCC, CE
• Model #: TU-IDES

Limited time offer, ends 06/30

• Specifications: PCIe - PCIe-X1,support PCIE X2,X4,X8,X16 Output interface - mSATA + SATA III OS - Windows10/8/7(32/64?)/ Vista(32/64?)/ XP/2003/2008/linux
• Package Contents: 1 x PCIe to mSATA + SATA card,1 x Driver CD
• Model #: PCIEMSATA

Limited time offer, ends 06/30

• Material: Metal
• Dimensions: 6x5x1167.3mm x 120.8mm x 19mm [Full height bracket]/167.3mm x 84mm x 19mm [Low profile bracket
• Part Number: SP-M21NVME
• Type: Enclosure
• Model #: SP-M21NVME

• Color: Black
• Cable Length: 24"
• Changer Type: USB to DB9 (RS-232)
• Specifications: Connector Types: 2 - DB-9 (9 pin; D-Sub) Male Interface: serial Number of Ports: 2 Card Type: Low / Standard Profile Max Baud Rate: 115200 bps Data Bits: 7, 8 Stop Bits: 1, 2 Parity: None, Odd, Even, Space, Mark Bus Type: Motherboard Header Internal Ports: 1 - IDC (10 pin; Motherboard Header) Female External Ports: 2 - DB-9 (9 pin; D-Sub) Male Chipset ID: FTDI FT232R Microsoft WHQL Certified: Yes Operating Temperature: -40°C to 85°C (-40°F to 185°F) Storage Temperature: -65°C to 85°C (-85°F to 185°F)
• Model #: ICUSB232INT2

Limited time offer, ends 06/30

• Package Contents: - 5.25” holding bracket 1 piece - 3.5” hard disk drive rack 2 pieces - 3.5” HDD screws 4 pieces - Shock Absorption Screws 6 pieces
• Model #: HDD-3.5-5.25-MA

Limited time offer, ends 07/24

• Color: Black
• Changer Type: USB to IDE&SATA
• Specifications: All in One Solution to Connect to Different Types of Interface's Hard Drive This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1. Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW. Compatible with Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS etc. Data Transfer Rate: up to 5Gb/s (10 times faster than USB 2.0). Supports drives with a capacity of up to 6TB. Backward compatible with USB 2.0/1.1. DC Power Supply 12V included for 3.5" devices. On/Off Switch for HDD protection. Pluy & Play, reliable and stable.
• Package Contents: All in One Soluti...
• Model #: W-E19-4

Limited time offer, ends 07/04

• Color: Black
• Changer Type: USB 3.0 to IDE SATA Adapter
• Connector A: 1 x USB 3.0
• Connector B: 1 x SATA/IDE
• Model #: Z1#Q3034_B_US

Limited time offer, ends 07/04

• Color: Black
• Changer Type: USB 3.0 to SATA IDE Adapter
• Connector A: USB 3.0
• Connector B: SATA IDE
• Model #: C03#Q2552_B_US

Limited time offer, ends 06/30

• Specifications: Fits in Standard 5.25 inch Driver Bay and may not fit in chassis with customized Bay Please ensure the 5.25 inch Driver Bay of your computer is standard size before ordering this item. 2 x 2.5 - inch Drive could Mounted to this ITEM at the Same Time. However Mounting only ONE drive is recommended for heat dissipation. SATA III 6Gbps data cable included Molex to SATA 15-pin power cable include, support 12V/5V PSU
• Package Contents: Mounting Bracket 12 (6+6) inch Molex 4 Pin to x2 15 Pin SATA Power Cable with Net Jacket 10inches SATA III 6Gbps Data Cables with latch locking 1x Mounting Screws Pack is included
• Model #: KIT-2x2.5-5.25-AL-BK

Limited time offer, ends 07/24

• Brand: Jansicotek
• Color: Black
• Changer Type: USB to IDE&SATA
• Specifications: All in One Solution to Connect to Different Types of Interface's Hard Drive This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1. Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW. Compatible with Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS etc. Data Transfer Rate: up to 5Gb/s (10 times faster than USB 2.0). Supports drives with a capacity of up to 6TB. Backward compatible with USB 2.0/1.1. DC Power Supply 12V included for 3.5" devices. On/Off Switch for HDD protection. Pluy & Play, reliable and stable.
• Model #: W-SA28-4

Limited time offer, ends 07/24

• Color: Black
• Changer Type: USB to IDE&SATA
• Specifications: All in One Solution to Connect to Different Types of Interface's Hard Drive This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1. Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW. Compatible with Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS etc. Data Transfer Rate: up to 5Gb/s (10 times faster than USB 2.0). Supports drives with a capacity of up to 6TB. Backward compatible with USB 2.0/1.1. DC Power Supply 12V included for 3.5" devices. On/Off Switch for HDD protection. Pluy & Play, reliable and stable.
• Package Contents: All in One Soluti...
• Model #: W-E02-4

Limited time offer, ends 07/04

• Color: Black
• Changer Type: 2.5"/3.5" HDD/SSD, 2.5"/3.5" IDE
• Specifications: usb hard drive adapter connect SATA/IDE devices to your computer or laptop via a USB3.0 adapters, helping you easily expand drive space, upgrade systems, store, create disk images, cloner back up files, and retrieve data from old hard drive to recover data. Compatible with 2.5"/3.5" HDD/SSD, 2.5"/3.5" IDE, 5.25" DVD-ROM,
• Features: The external hard drive reader support ultra-high-speed usb 3.0, so that the data transfer rate of up to 5Gbps, ensure the stability of data retrieval transmission, backward compatible with usb 2.0 / usb 1.1. Hard drive reader to usb adapters support Windows XP/Vista/7/ 8.1/ 8/10, Mac OS 10 or higher,
• Model #: Z3#Q2600_B_US

Limited time offer, ends 07/04

• Color: Black
• Changer Type: USB 3.0 to IDE/SATA Adapter
• Specifications: This all-in-one adapter functions as a universal hard drive reader, supporting both 3.5" and 2.5" IDE/SATA drives. Its triple-interface design (SATA III + dual IDE) ensures compatibility with legacy and modern storage devices.
• Connector A: 1 x USB 3.0
• Model #: IDE1#Q0132_B

Limited time offer, ends 07/24

• Brand: Jansicotek
• Color: Black
• Changer Type: USB to IDE&SATA
• Specifications: All in One Solution to Connect to Different Types of Interface's Hard Drive This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1. Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW. Compatible with Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS etc. Data Transfer Rate: up to 5Gb/s (10 times faster than USB 2.0). Supports drives with a capacity of up to 6TB. Backward compatible with USB 2.0/1.1. DC Power Supply 12V included for 3.5" devices. On/Off Switch for HDD protection. Pluy & Play, reliable and stable.
• Model #: W-SA28-1

Limited time offer, ends 07/09

• Model #: 4687963985

Limited time offer, ends 07/04

• Type: USB 3.0 To Sata Adapter Converter Cable
• Color: Black
• Length: 0.4 Meter
• Style: 1 X SATA
• Model #: Q0152_B

• Color: Orange
• Changer Type: eSATA to SATA
• Model #: ESATA-ML-4XiREV02

• Model #: B1073

• Model #: B1064

• Model #: B1049

• Model #: B1020

• Model #: 8567457950

• Model #: CYSM-SA-084

• Model #: 723990

• Model #: 8567456946

• Model #: 8567457961

• Model #: BEH09532X15

• Model #: 69097878657

• Model #: IDE SATA - 2.5 3.5 HDD SSD

• Model #: C2AG-1114-3

• Model #: C2AG-C0324-12

• Model #: C2AG-1224-C4

• Model #: C2AG-1110-107

• Model #: C2AG-C0324-4

Limited time offer, ends 07/22

• Model #: U3-068+SA-119

• Model #: C2AG-1105-82

• Model #: C2AG-1110-65

• Model #: C2AG-0122-C6

• Model #: C2AG-0122-C17

Limited time offer, ends 06/29

• Type: PCI Express Controller Card
• Compatibility: M Key PCIe M.2 NMVe, B Key SATA M.2 NGFF SSD (2230/2242/2260/2280/22110mm)
• Specifications: 1.Connects one B key & one M key NGFF SSD at the same time to PCI-E 4X motherboard. 2.Compliant with PCI Express M.2 specification 1.0. 3.Compliant with SATA 3.0 specification for B key. 4.Compliant with PCI-E 4X 3.0 specification for M key.
• Dimensions: 5.52x4.73x0.79 inch.
• Model #: DUL-M2T4X+SR

• Color: Black
• Changer Type: USB to IDC
• Specifications: Connector Types: 1 - IDC 10 Female Connector Types: 2 - USB A Female
• Weight: 0.02
• Model #: USBMBADAPT2

• Model #: B3EN-S1843

• Model #: B3EN-S1838

• Model #: B3EN-S1842

• Model #: B3EN-S1840

• Model #: B3EN-S1847

• Color: Other
• Changer Type: SATA 15 Pin Power Adapter to LP4
• Specifications: Color: Black Connector Types: 1 - LP4 Female Connector Types: 1 - SATA Power Male
• Weight: 0.04
• Model #: LP4SATAFM

• Model #: B3EN-S1850

• Model #: B3EN-S1849

• Model #: B3EN-S1805