DIY Cooling

• Model #: BP-TBWP-C06-4P

• Type: Fittings
• Model #: BP-TBDG14AALPII

Limited time offer, ends 10/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name : Heatsink; Material : Aluminium Color : Silver Tone Overall Size : 160 x 80x 26.9mm/ 6.3" x 3.15" x 1.09" (L*W*H) Weight : 410g Package Content : 1 x Heatsink
• Dimensions: 160 x 80x 26.9mm/ 6.3" x 3.15" x 1.09" (L*W*H)
• Model #: 11-001-331

• Type: Tubing
• Model #: BP-PVCT3858CL-2M

• Model #: ACFAN00351A

Limited time offer, ends 10/07

• Model #: M.2-SSD Heatsink

• Type: CPU Block
• Model #: N-RTXPRO6000-WS-SR

• Type: CPU Block
• Model #: RT14M-TOOL

• Model #: BPM-DLDR-V2

• Model #: BP-DW45R-4P

• Model #: BPTA-DOTFH1622-MB

• Brand: ModMyMods
• Model: 649823636869
• Part Number: MOD-0380
• Color: Candy Copper
• Model #: 649823636869

• Type: CPU Block
• Model #: CPU-XPR-M-V3

• Type: Fittings
• Features: Dimension: ?22 x 25 (H) (mm) Applicable: G 1/4 Weight: 47 g Material: CU Screw Thread: G 1/4 Note: Female to Male
• Model #: CL-W046-CU00SL-A

Limited time offer, ends 10/30

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

• Type: CPU Block
• Model #: CP-D3PB-X

• Type: CPU Block
• Model #: RTP16M-630

• Model #: BP-BHT16CB-90R

• Type: Fittings
• Model #: BP-TBEML16-6P

Limited time offer, ends 10/30

• Model #: 11-001-362-5CM

Limited time offer, ends 10/30

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 1.0mm
• Dimensions: 20mm x 20mm x 1.0mm
• Model #: 11-001-272

• Type: Fittings
• Model #: BP-MVV-TBBK

• Brand: Thermal Grizzly
• Model: TG-DM-FIT-0003
• Part Number: TG-DM-FIT-0003
• Color: Black
• Model #: TG-DM-FIT-0003

Limited time offer, ends 10/30

• Model #: 11-001-325

• Model #: BPM-WTCR140

• Brand: Phanteks
• Series: Glacier R220C
• Type: Combo Reservoir
• Specification: Pump Compatibility: DDC Installation Compatibility: 120/140 mm fan/radiator Seal O-Ring: DuPont VITON Reservoir - ID: 126.72 /W: 1.78 (AS049) Color: Transparent RGB LED type: Digital-RGB (addressable) LED Number: 5050, 18pcs LED Electricity Spec: 5V/ 0.7A/ 3.5W Capacity: 200ml Materials: Acrylic body, Acrylic backplate, Steel bracket Max Water Loop Temperature: 60 degree C Fill Port: 1 x G 1/4 No. of Inlet: 3 x G 1/4 No. of Outlet: 1 x G 1/4
• Model #: PH-R220C_02

• Brand: Thermal Grizzly
• Model: TG-D-030-R
• Part Number: TG-D-030-R
• Color: Grey
• Model #:

Limited time offer, ends 10/30

• Brand: EN-Labs
• Model #: 36WPCICON5D

• Type: Liquid Cooling System
• Fan Size: No Fans
• Model #: A-XF6900XT-X_RBW

• Model #: BP-DWCPF-CC5V3-4P

• Type: Fittings
• Model #: BP-ILF-BS

• Type: Liquid Cooling System
• Model #: BP-MVVFRGIG14-SLBK

Limited time offer, ends 10/30

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 0.5mm
• Dimensions: 20mm x 20mm x 0.5mm
• Model #: 11-001-270

• Brand: Bitspower
• Type: Liquid Cooling System
• Model #: BP-MBDG14AALPII

Limited time offer, ends 10/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 10 pcs of 8.8x8.8x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces....
• Model #: 11-001-393

• Type: CPU Block
• Model #: 6932167222671