DIY Cooling

Limited time offer, ends 10/30

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 0.5mm
• Dimensions: 20mm x 20mm x 0.5mm
• Model #: 11-001-270

Limited time offer, ends 10/30

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
• Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
• Model #: 11-001-328

• Type: Tool Set
• Specification: Materials Tube Cutter: Plastic + Steel Bending Insert: Rubber Bending Guides: PP Squeeze Bottle: PE 24-Pin Jumper: PP Sandpaper: Paper Tube Cutter Compatibility 16 mm Hard Tube Bending Insert Compatibility For ID:12mm / OD:16mm Hard Tube Bending Guides Compatibility 16 mm Hard Tube Squeeze Bottle Capacity: 250 ml Sandpaper Grit: 240
• Package Contents: Tube Cutter 1x Silicone Bending Insert 1x Bending Guides (set) 1x Squeeze Bottle 1x 24-Pin Jumper 1x Sandpaper 1x Manual 1x
• Model #: PH-GEF_TLS_BK

• Model #: CW-9061044-WW

• Type: CPU Block
• Model #: CPU-RAY-MC-M

• Type: CPU Block
• Model #: 6932167225887

Ten Dollars off w/ promo code PHAN411, limited offer

• Brand: Phanteks
• Type: Radiator
• Radiator Size: 470x140x30 mm
• Radiator Material: Fins: T2 Copper Water Chamber: H62 Brass Thread Insert: H59 Brass Side Pane: 430 Stainless Fittings: Brass Fitting Insert: ABS
• Model #: PH-GEF-RAD423_BK

• Type: CPU Block
• Model #: CPU-XPR-POM-M-V2-NE

Ten Dollars off w/ promo code PHAN445, limited offer

• Brand: Phanteks
• Type: Radiator
• Radiator Size: 470x140x30 mm
• Radiator Material: Fins: T2 Copper Water Chamber: H62 Brass Thread Insert: H59 Brass Side Pane: 430 Stainless Fittings: Brass Fitting Insert: ABS
• Model #: PH-GEF-RAD423_WT

• Type: CPU Block
• Model #: A-GV9070GMOC-X

Limited time offer, ends 10/30

• Model #: 11-001-100

Limited time offer, ends 10/30

• Model #: 11-001-066

• Type: CPU Block
• Model #: A-RX7900XTX-X

Limited time offer, ends 10/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for Router,power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 20mm x 14mm x 6mm,Please check your componet careful, and make sure the size of the heatsink fits it no problem Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 20 x 14x 6mm/ 0.8" x 0.55" x 0.24" (L*W*H) Weight: 25g Package Content: 10pcs x Heatsink
• Dimensions: 20 x 14x 6mm
• Model #: 11-001-321

• Type: CPU Block
• Model #: B-PCI-EM-X-V2

Limited time offer, ends 10/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 20mm x 20mm x6mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 20mm x 20mm x 6mm 3M 9448A Heat-conductive adhesive tape is included Package Content: 10 x Heatsink
• Dim...
• Model #: 11-001-060

• Type: CPU Block
• Model #: N-TITAN-PAS-X

Ten Dollars off w/ promo code PHAN199, limited offer

• Part Number: PH-GB4090MS_BK01_BP
• Type: VGA Block & Cooler
• Block Compatibility: MSI GeForce RTX® 4090 SUPRIM X 24G MSI GeForce RTX® 4090 SUPRIM 24G MSI GeForce RTX® 4090 GAMING X TRIO 24G MSI GeForce RTX® 4090 GAMING TRIO 24G
• Block Dim.: 10.49 x 5.95 x 0.74 in (266.56 x 151.24 x 18.9 mm)
• Model #: PH-GB4090MS_BK01_BP

• Brand: Thermal Grizzly
• Model: TG-DM-FIT-0004
• Part Number: TG-DM-FIT-0004
• Color: Black
• Model #: TG-DM-FIT-0004

Limited time offer, ends 10/30

• Model #: 11-001-255(2)

• Type: Chipset Block
• Model #: 1022619

• Type: CPU Block
• Model #: CPU-4677-SR

Limited time offer, ends 10/30

• Model #: 11-001-062

• Model #: BPM-VG5090MSR

Ten Dollars off w/ promo code PHAN228, limited offer

• Type: Complete DIY Water-Cooling Kit
• Block Compatibility: Intel: LGA 1700 AMD: AM4 /AM5
• Block Dim.: 72 x 64 x 25.7mm (2.83 x 2.52 x 1in)
• Radiator Size: 360mm
• Model #: PH-GEF_CPU450_DBK

• Type: CPU Block
• Model #: 6932167224453

• Type: CPU Block
• Model #: 6932167224668

Limited time offer, ends 10/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 5 pcs of 14x14x6mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. Th...
• Model #: 11-001-395

• Type: CPU Block
• Model #: B-DTH-K40-V5

• Type: Fittings
• Model #: BP-TBWP-C04

• Type: CPU Block
• Model #: R-SL-A48-SBK

• Model #: BP-BS90R2LD-2P

Limited time offer, ends 10/30

• Model #: 11-001-291

• Brand: Alphacool
• Model: 17272
• Part Number: 1011292
• Type: Water Blocks
• Model #: 17272

• Type: CPU Block
• Model #: 1023311

• Type: CPU Block
• Model #: N-AS3090STRIX-X-V3