BEST SELLERS

In Switches

No setup required. Just plug and play. Fast switch with no noise. Stays cool.

- Can sustain 1 Gb/s transfers between 2 ports (haven't tried testing between multiple ports). - Standard adapter plug. - Solid construction.

- Easy to set up, just plug and play. - Works perfectly without affecting speed.

Power supply has sideways orientation which helps it to not block other outlets. The thick metal case is very sturdy. It feels industrial. It would be a good choice for a rough environment like an auto shop. The added strength doesn't add to the size. I have three 8 port switches, two are plastic, and this one is the middle size. The ethernet port location on the opposite side of the power port is a nice feature. It would work well at a workstation where people need to plug in frequently and don't need to hide the cables. It has two LEDs for the connection status, one for 10/100 speed and the other for 1000 speed. Not all switches have two LEDs like this. I really appreciate knowing the connection speed. I tested a single 10GB file transfer on this switch against one of my other gigabit switches. This one was 3 seconds faster, taking 1 minute 33 seconds. I tested a transfer of 8012 files which totalled 10GB against one of my other switches. This one was a whopping 27 seconds faster, at 3 minutes 00 seconds.

-Price -Small profile -Plug and play -Delivers rated speed of 2.5Gb -Silent operation

UniFi compatible and suited to the kinds of awful environmental conditions the old Ubiquiti Tough Switch Pro was perfect for. Being managed by UniFi rather than UISP simplifies the network, so it's GREAT to have this niche filled. Surprisingly useful to have more ports, didn't know we needed them until we had the option.

This switch can be used as is if all you need is to add some more ports to your network, and is also feature rich with many different control options. If you are really into tweaking out connected devices and need to have more control over devices that are connected to your network then this is the switch to purchase! Power cord plugs into the back of the unit, and all connections are made in the front. Also has an easy access reset button in the front to the right that is clearly labeled in the event that you have to reset the device due to a lost password, or to just start setup over from scratch. LED’s on each jack will give you connection status with just a glance along with a data flow indicator LED. DHCP is not enabled by default, and most people usually have this type of setup on their networks. Also the default IP address is setup for 192.168.0.1, so depending on your network setup, you will need to run the configuration utility right away to change the settings. The utility had no problem detecting the switch even though its address was different than what my home network is setup for. Once DHCP was enabled through the configuration utility the device was recognized with no problem on my network. Included instructions on how to connect to the device for setup the first time worked exactly as described. Device allows full control of all port settings. Such as speed and duplex, flow control, and lag. Also supports IGMP Snooping and Port Trunking. The Monitoring feature will give individual port statistics such as Status of connected ports; transmit/receive of good/bad packets. Also supports Port Mirroring and Loop Prevention. Each port can also be individually configured with optional MTU VLAN control settings, along with QoS, Bandwidth control and Storm control. Another nice feature is the Cable Test option which will allow you to test your cables and give you the length of each cable in meters. Built solid, all metal enclosure, wall mountable, also includes pads for bottom of unit if you prefer to have it sitting on your desk. Initial setup is easy by simply plugging a network cable directly from your router to the switch and you then have 7 more available ports for hard wired devices!

The switch has a very heavy and quality feel to it. POE+ works great with my cameras, and wireless access points.

* Nice compact form factor * Included power adapter option is nice * Even nicer is being able to power it off PoE - one less wire/plug socket to deal with * Integrates well with the UniFi Network app, showing what devices are connected to it

It worksit's small

The price is nice and it works. My internet speed test seemed good with this even with a 100ft run of network cable.

Reliable and solid, reasonably priced.

Easy setup

-Amazing speed. -Very rugged design. -100% uptime. -VERY fast when connecting computer. (no more watching those three little dots.)