DIY Cooling

• Model #: 821922376403

• Model #: 31847533150326

• Brand: ModMyMods
• Model: 649823636258
• Part Number: MOD-0316
• Color: Grey
• Model #: 649823636258

• Brand: ModMyMods
• Model: 649823636265
• Part Number: MOD-0317
• Color: Grey
• Model #: 649823636265

• Model #: ARCTIC5

(1)

• Type: CPU Block
• Block Compatibility: AMD Socket AM4 / AMD Socket AM5 / Intel LGA 1700
• Color: Stealth Gray
• LED Color: RGB
• Model #: CX-9010021-WW

• Type: CPU Water Block
• Block Compatibility: AMD Socket AM4 / AMD Socket AM5 / Intel LGA 1700
• Color: White
• LED Color: RGB
• Model #: CX-9010024-WW

• Block Compatibility: M.2 SSD
• Model #: Heatsink 22x70x3

Limited time offer, ends 10/30

• Model #: 11-001-236

Limited time offer, ends 10/18

• Brand: Bailink
• Series: Classic M.2 Thermal Pad
• Type: Classic M.2 Thermal Pad
• Features: Dimensions - thermal pad fits for M.2 2280 SSD (22 x 80mm) Heatsinks. Nano Grease Material - Made from unique Nano Silicon Grease Material, with good thermal conductivity ability. Soft and Low Viscosity - Soft enough and good ductility, compatible with uneven surface of the M.2 SSD. Low viscosity, with no damage to the SSD warranty label. Safe and easy to use - Remove the protective films on both sides of the thermal pad and put it under the M.2 SSD Heatsink. Wide Compatibility - Item Size: 70 x 20 x 1mm, Compatible Samsung: 850EVO / 860EVO / 960EVO / 970EVO / 950PRO / 960PRO / 970PRO / SM951 / SM961 / PM951 / PM961 / CM871a / PM871 / PM981 / XP941, no cutting required.
• Model #: BL-4PACKSRP

Limited time offer, ends 10/30

• Model #: 11-001-325

• Brand: Alphacool
• Model: 1023192
• Part Number: 1023192
• Color: Blue
• Model #: 1023192

Limited time offer, ends 10/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 8.8mm x 8.8mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 8.8mm x 8.8mm x 5mm Heat-conductive adhesive tape is included Weight: 35g Package Content: 50 x Heatsink...
• Model #: 11-001-046

• Brand: Thermal Grizzly
• Model: TG-HP-002-R
• Part Number: TG-HP-002-R
• Color: Yellow
• Model #:

• Brand: Alphacool
• Model: 1021763
• Part Number: 1021763
• Color: Grey
• Model #: 1021763

• Brand: Alphacool
• Model: 1021761
• Part Number: 1021761
• Color: Grey
• Model #: 1021761

• Type: CPU Block
• Color: Black (POM)
• Model #: CPU-XPR-POM-I-V3

• Brand: Thermal Grizzly
• Model: TG-AR-100
• Part Number: TG-AR-100
• Color: Clear
• Model #:

• Brand: Thermal Grizzly
• Model: TG-DP-006-R
• Part Number: TG-DP-006-R
• Color: Grey
• Model #:

• Brand: Alphacool
• Model: 1023191
• Part Number: 1023191
• Color: Blue
• Model #: 1023191

• Type: CPU Block
• Model #: 6973826681187

• Type: CPU Block
• Model #: CPU-XPR-POM-M-V2-NE

• Brand: Alphacool
• Model: 4250197134026
• Part Number: 1023186
• Color: Blue
• Model #: 4250197134026

• Type: CPU Block
• Model #: N-ST4080SPGF-X

• Type: CPU Block
• Model #: N-AS3070DUAL-X-V2-NE

Limited time offer, ends 10/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 10 pcs of 11x11x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. T...
• Model #: 11-001-394

Limited time offer, ends 10/30

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 14mm x 14mm x6mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 14mm x 14mm x 6mm 3M 9448A Heat-conductive adhesive tape is included Package Content: 20 x Heatsink
• Dim...
• Model #: 11-001-052

Limited time offer, ends 10/30

• Model #: 11-001-362-4CM

• Type: CPU Block
• Model #: CPU-XPR-C-M-NE

• Type: CPU Block
• Model #: N-AS3070STRIX-X-V2

• Brand: Alphacool
• Model: 1023189
• Part Number: 1023189
• Color: Blue
• Model #: 1023189

• Brand: Thermal Grizzly
• Model: TG-HP-030-R
• Part Number: TG-HP-030-R
• Color: Yellow
• Model #:

• Type: CPU Block
• Model #: N-GV4080EOC-X

• Brand: Thermal Grizzly
• Model: TG-DP-030-R
• Part Number: TG-DP-030-R
• Color: Grey
• Model #:

• Type: CPU Block
• Model #: CPU-XPR-M-V3

• Model #: 14755