
- Connector A: 1x USB 3.0 male
- Connector B: 1x 2.5in SATA III
- Model #: E000133-1
- Item #: 9SIAPY9EDG7847
- Return Policy: View Return Policy
Easy to use Good value

- Parts: 1 Year
- Model #: 1125SS-V1-BK-EP
- Item #: 9SIA1DS52W8546
- Return Policy: View Return Policy
Tool-less Hotswap (I have not tested) Passthrough

- Type: M.2 port (M key) into one PCIe x4
- External Ports: M.2 (NGFF)
- Internal Ports: PCI Express x 4 via full size x 16 pinout
- Operating Systems Supported: • A computer and BIOS (usually set to AHCI) compatible with NVMe SSD over PCIe lanes. • Windows 7 with Microsoft’s Hotfixes for NVMe SSD. • Windows 8 and above. • Linux. • If after installation you get a yellow exclamation mark under the Device Manager, you may need to get an additional driver
- Model #: EC-PCIE
- Item #: 9SIBK19JMZ6153
- Return Policy: View Return Policy
Cooling is good for its size. Heatsink has rounded edges and I was able to install 2tb m.2 . Came with 3 thermal pads strips

- Type: Enclosure
- AC Adapter: Yes
- Material: abs plastic
- HDD Count Supported: Horizontal
- Model #: BL-ST62
- Item #: 9SIB3WAK7Y5875
- Return Policy: View Return Policy
- Able to dock both IDE & SATA 2.5" and 3.5" HDDs/SSDs and Optical drives as well - Easy to use and compact design is great for when you travel

- Type: PCI Express to M.2 Card
- External Ports: M.2
- Internal Ports: PCIE
- Data Transfer Rate: PCIE 4.0 X4
- Model #: PA09-HS
- Item #: 9SIAMKHATW8724
- Return Policy: View Return Policy
Didn't need to load a driver - the NVME drive on it was just there.

- Part Number: EC-SSHD
- Color: N/A
- Cable Length: 4 In
- Changer Type: USB 3.0 to SSD/2.5''
- Model #: EC-SSHD
- Item #: 9SIBK19JR31650
- Return Policy: View Return Policy
Simple. It just works.

- Model #: DZ-ZHT-273
- Item #: 9SIA4REKKW3907
- Return Policy: View Return Policy

- Dimensions: 115*25*6 mm.
- Specifications: Item: M. 2 SSD to USB 3.1 Type A Adapter Board. Material: PCB Board. Protocol: B-Key and M-Key. Input: M.2 SSD Slot, both B-Key and M-Key M.2 SSD (NVMe, SATA Based). Output: USB 3.1 Type A. Dimension: 115*25*6 mm. Transfer Speed: 10Gbps/ 5Gbps (NOTE: If connect with usb 3.0 type a port, speed will be 5Gbps).
- Type: PCB Board
- HDD Count Supported: Single SSD
- Model #: M2TABD-BM
- Item #: 9SIARE9C136365
- Return Policy: View Return Policy

- Series: SATA to USB 3.0 Adapter
- Part Number: BL-USBSATA
- Type: External Hard Drive Converter Cable for 2.5" 3.5" HDD, SSD
- Color: Black
- Model #: BL-USBSATA
- Item #: 9SIB3WAKDV0706
- Return Policy: View Return Policy
![SABRENT M.2 SSD [SATA] to 2.5 Inch SATA III Aluminum Enclosure Adapter (EC-M2SA) SABRENT M.2 SSD [SATA] to 2.5 Inch SATA III Aluminum Enclosure Adapter (EC-M2SA)](https://c1.neweggimages.com/productimage/nb300/AME8S200204gm4ne.jpg)
- Type: Enclosure
- Material: Aluminum
- Model #: EC-M2SA
- Item #: 9SIBK19JN63894
- Return Policy: View Return Policy
- Easily adapts my SATA-based m.2 drives - Enclosure is high quality aluminum and would trust it to hold an m.2 drive permanently if needed, no problem

- Model #: A-E01
- Item #: 9SIBFMPK5E7972
- Return Policy: View Return Policy

- Color: Black
- Parts: 1 Year
- Labor: 1 Year
- Model #: EC-TFPE
- Item #: 9SIBK19K812524
- Return Policy: View Return Policy

- Color: Black
- Part Number: 6942227107961
- Parts: 1 Year
- Model #: D2SS-6G-BK-BP
- Item #: 9SIA1DSK874464
- Return Policy: View Return Policy
Easy to install Easy to use Power Switch Only $10 on sale Easy to mount and unmount in Linux without rebooting. I have GRUB on an internal drive and can select to boot from this drive. UUIDs are not changed so boot is the same even if the physical location has changed.

- Color: Black
- Conversion Tray: 1 x 2.5" Drive to 3.5" Bay
- Mobile Rack Drives Support: 1 x 2.5" Drive to 3.5" Bay
- Mobile Rack Interface: SATA I/II/III
- Model #: 25T35-2P
- Item #: 9SIA6V86Z27745
- Return Policy: View Return Policy
Fits all of my old computers fine.

- Model #: N2-M2-SSD-DUPLICATOR
- Item #: 9SIA1K6KKT3249
- Return Policy: View Return Policy

- Model #: M2EX30T80-2P
- Item #: 9SIARE9K869780
- Return Policy: View Return Policy

- Changer Type: IDE to SATA
- Specifications: NOTE: 1. The adapter need for external power adapter to work. 2. When connecting the riser need to turn off your computer. 3. IDE Hard disk / CD-ROM motherboard SATA adapter when the need to hard disk / CD-ROM set jumpers main dish.
- Connector A: 3.5" 40 pin Female IDE / PATA
- Connector B: 7+15 pin (22 pin) SATA
- Model #: 35IDE2SATA-MNDL
- Item #: 9SIA6V89YW2632
- Return Policy: View Return Policy
Bought to recover data from an old IDE drive. Old motherboard died, new one did not have IDE ports, only SATA. Worked like a charm. Easy to use.

- Color: Black
- Cable Length: 1.3ft / 40CM
- Specifications: Material: Metal 2.5 to 3.5 bracket Color: Black Cable: 1.3ft (40CM) SATA data and power combo cable
- Package Contents: 2.5" to 3.5" Metal Mounting Adapter Bracket SATA data & power combo cable Screw bag
- Model #: 25TO35MAKIT
- Item #: 9SIACJF7AW7293
- Return Policy: View Return Policy

- Model #: DDR5
- Item #: 9SIC472KW14909
- Return Policy: View Return Policy
![SABRENT 3.5-Inch to x2 SSD / 2.5-Inch Internal Hard Drive Mounting Kit [SATA and Power Cables Included] (BK-HDCC) SABRENT 3.5-Inch to x2 SSD / 2.5-Inch Internal Hard Drive Mounting Kit [SATA and Power Cables Included] (BK-HDCC)](https://c1.neweggimages.com/productimage/nb300/AME8S2203011C59ZB61.jpg)
- Color: Black
- Conversion Tray: 2 x 2.5" Drive to 3.5" Bay
- Compatible Products: 3.5"
- Model #: BK-HDCC
- Item #: 9SIBK19JT14946
- Return Policy: View Return Policy
Perfect fit and extra cables as a bonus!