External Connectors: 2 x M.2 NVMe port (Dedicated PCIe 3.0 x4 per port)
RAID: RAID 0/1
Dimensions: 6.29" x 4.76" x 0.85"
Operating Systems Supported: Windows 10
Windows Server 2016 or later
Linux Kernel 3.3 or later
Microsoft Hyper-V & Xen Server 7.6 and later
Proxmox 6.1 and later
Package Contents: USB 3.0 to M.2 SATA External SSD Enclosure with UASP
1 x USB 3.0 Cable
1 x SSD screw kit
1 x Mini Screw Driver
1 x Instruction Manual
Features: 1.Bailink Dual M.2 PCIE Adapter, Come with SATA cable and Screw Screwdriver
2.Dual M.2 PCIE Adapter - Enhance your storage capabilities with our Dual M.2 PCIE Adapter, Converts one M.2 NVMe SSD (M Key) interface to PCIe 3.0 x4 interface (PCIe 2.0 Compatible), Converts one M.2 SATA SSD (B Key or
Specifications: Chipset ID: JMicron - JMS580
Drive Size: 22mm - M.2 SATA
Supported Drive Height(s): 2242 / 2260 / 2280
Compatible Drive Types: M.2 (SATA, B-Key, NGFF) / M.2 SATA (NGFF, B+M-Key)
Maximum Data Transfer Rate: 6 Gbps
MTBF: 50,000 hours
TRIM Support:Yes
Type and Rate: USB 3.1 Gen 2 - 10 Gbit/s, SATA III (6 Gbps)
UASP Support: Yes
Drive Connectors: 1 - M.2 (SATA, B-Key, NGFF) Receptacle
Host Connectors: 1 - USB Type-C (24 pin) USB 3.1 (10Gbps) Male
Note:
Not compatible with M.2 NVMe or AHCI PCI-Express SSDs
Windows 7 and earlier Windows versions do not support TRIM with USB to SATA devices.
Mobile Rack Drives Support: 1 x 3.5" Drives to 5.25" Bay
Mobile Rack Interface: SATA I/II
Specifications: Hard Drive Compatibility: 3.5-Inch SATA/300(SATA II) or SATA/150 (SATA I) Hard Drives
System Requirements: PC or Mac with a 5.25 Inch Drive Bay
Drive Drawer Dimensions: 7.5" x 5.8" x 1.6"
Cooling Fan: Ball-Bearing Fan
Fan Dimensions: 40 x 40 x 10mm
Fan Enclosure: Plastic
Drive Drawer Enclosure: Aluminum
Drive Size: Supports up to 750Gb hard drive
Note: Unit is model specific and is not meant for use with different models of drive drawer unless otherwise stated
Operating Systems Supported: System Requirements
- Microsoft Windows & Apple Mac OS
- Thunderbolt5/4/3,USB4/3.2/2.0 computers
- Only compatible with M.2 M-Key and M&B-Key connector
Features: - Supports two M.2 M-Key slots, allowing simultaneous insertion of two PCle NVMe SSDs for quick expansion.
- Offline cloning function allows fast and accurate cloning of original disk data to the target disk,eliminating the transmission process.
- Supports mobile OTG function, enabling easy reading and writing of data from mobile devices to the hard disk.
- USB-C interface with a transfer rate of up to 40Gbps, compatible with Thunderbolt 5/4/3, USB4/3.2/2.0 computers.
- A single PCle 4.0 drive supports a maximum sequential read speed of 3300MB/s and a maximum seauential write speed of 3000MB/s. If you use PCle 3.0 SSD, the per...