Features: 3D NAND TECHNOLOGY: 3D NAND Flash delivers high read/write speeds up to 450 MB/s. Titanium One allows you to transfer large amounts of data in mere seconds.
COMPATABILITY: USB 3.0 cable included, compatible with Laptops and Desktops. Windows and MAC OS operating systems.
DURABLE: Titanium One has no moving parts, protected with
Operating Systems Supported: System Requirements
- Microsoft Windows & Apple Mac OS
- Thunderbolt5/4/3,USB4/3.2/2.0 computers
- Only compatible with M.2 M-Key and M&B-Key connector
Features: - Supports two M.2 M-Key slots, allowing simultaneous insertion of two PCle NVMe SSDs for quick expansion.
- Offline cloning function allows fast and accurate cloning of original disk data to the target disk,eliminating the transmission process.
- Supports mobile OTG function, enabling easy reading and writing of data from mobile devices to the hard disk.
- USB-C interface with a transfer rate of up to 40Gbps, compatible with Thunderbolt 5/4/3, USB4/3.2/2.0 computers.
- A single PCle 4.0 drive supports a maximum sequential read speed of 3300MB/s and a maximum seauential write speed of 3000MB/s. If you use PCle 3.0 SSD, the per...
Size: Please Note As Hot Plug only means that the PC doesn't have to be restarted after disk swaps, it is crucial to disconnect and switch off the docking station before removing and changing any disk drives, to avoid data loss and structural damage. Please make sure the device is powering
Specifications: 1. 4/5 Bay Docking station with clone function for 2.5 & 3.5 inch HDD / SSD
2. High speed Type-C 3.1, save your time
3. High heat dissipation efficiency
4. IntelligentAnd durable
5. Store what you want
6.Offline clone function
Features: 5Gbps Transmission Speed: Using USB3.0 connector, UASP ultra-high speed, the transmission speed can reach up to 5Gbps and compatible with USB2.0 and USB1.1.
Support one key Offline Clone: No need to connect any PC/laptop, support one button clone function, just connect power and insert SSDs to copy data or full disk.
Specifications: 4Kn Support: Yes
Hot Swap Capability: Yes
Insertion Rating: 50,000 cycles
Max Drive Capacity: Currently tested with up to 10TB 7200 RPM hard drives
Maximum Data Transfer Rate : 6 Gbps
S.M.A.R.T. Support: Yes
TRIM Support: Yes
Type and Rate: USB 3.0 - 5 Gbit/s / SATA III (6 Gbps)
UASP Support: Yes
Specifications: Material: PCB Board. Protocol: M-Key and B+M Key. Input: M.2 SSD Slot, both M-Key and B+M Key M.2 SSD (NVMe, SATA Based). Output: USB 3.1 Type A. Dimension: 115*25*6 mm. Transfer Speed: 10Gbps/ 5Gbps (NOTE: If connect with usb 3.0 type a port, speed will be 5Gbps).
Specifications: Applications: 1. Make sure to move to High Sierra while still on your old drive, so that a newer firmware is installed that can handle NVMe. 2. Do a full backup to your TimeMachine. 3. Create a High Sierra Installer on a bootable USB stick. 4. Open the macbook and disconnect the battery while wsitching out the drive and make sure both adapter and new SSD sit snug. Finally reconnect the battery before closing the shell. 5. Insert the installer USB stick from step2, and press the option key while the machine starts. Once its up you can now go to the disk utils to format.
Package Contents: 1x M.2 NVMe SSD Adapter Card for Upgrade of Macbook 2013-2017.
Features: Comes with a silicone protective case and lanyard for enhanced SSD protection and portability.
Features an aluminum alloy shell with a multi-stacked heat dissipation design for effective cooling.
Supports a 10Gbps transmission rate for fast and reliable data transfer.
Dual protocol support for NVME+NGFF, catering to various storage requirements.
Fully compatible with Windows, Mac