BEST SELLERS

In HDD / SSD Accessories

Good construction.

Really cheap case, extremely good quality

These stand upright on 3 sides - the spine has a rib that prevents it, but this allows shelf-stacking vertically or horizontally. Internal padding is minimal but seems adequate until I'm drop-kicking these routinely. The unsnap-hinge is a wide, sturdy lift-up, not tiny fingernail-breaking bits. There is much to like about these, and we'll buy more.

* single 15-pin power for 6 bays * low profile so there is plenty of room in the back for attaching SATA cables * status LEDs for both power and read/write * fan is fairly quiet * much less expensive than other solutions from icy dock * great for a DIY NAS box or to populate an unraid server with SSDs (not my specific application)

I got this because I wanted to make backups quickly that I could store off-site. As you can see it accepts both popular drive sizes. No software needed. You may need to boot into your BIOS to enable hot swap.

I thought this is the only 12Gbps hot-swap hard drive module I could found. Built a file server and like to try SSD drives for maximizing data transfering speed. This module’s performance is pretty impressive for me! The 12Gbps mini-SAS HD is awesome!

- Sturdy, rigid construction - Non-reactive material - SSD is secure even without screws - Adequate ventilation

- you can install a 2.5" SSD or laptop HDD and a 3.5" HDD at the same time if you have the SATA ports to support it of course. Only uses one SATA power connector. - installs in single bay

I used this to read contents from over 300 DVDs and it worked at a nice speed with no slow down on a SATA DVD Drive. Later, I connected it to a LG Black 16X Blu-Ray BDXL SATA Internal Rewriter, Model BH16NS40 and it worked! I was able to play Blu-ray movies without problems, admittedly I didn't try burning any discs.

Quick setup. Works without screws. Does the job. Wouldnt use if you move the case around a lot by car.

This worked! Saved all my data from an older drive!

Fan ventilation is good. Takes 3 sata drives (only sata, not sas) connectors and 2 sata power connectors for 3 drives. You need builtin fans for high density storage like this. Getting a cage and adding one yourself may be cheaper but it will take time and you'll need to find the quiet fans and mount them - it is not worth it. Get a product like this that has it built in. The board has all the power and everything else in it.

The best holder so far and if you got old brackets it will also hold it

sturdy and perfectly aligned with open front for a perfect cooling. not too loud but they could have a hydro dynamic bearing since they are charging this high price.

Inexpensive, Requires only +12V power supply, versus some others that may also require +5V power supply.

Fits the drive like a glove! It fit in my case perfect too.