LINKSYS WET54G 54Mbps Wireless-G Ethernet Bridge

Pros: Works as specified. As fast as a wired connection with 4meg DSL

Cons: Initial firmware (1.08) was problematic. Updated firmware is fine but you have to get the right one!

Overall Review: This is new V3.1 hardware. Initial firmware (1.08) had issues configuring WEP security settings. I went to the Linksys site (US) and found V3 firmware and downloaded V2.07. Then I ran into an error in the Linksys documentation. You have to type "admin" for the user and "admin" for the password to access the web page setup. The documentation says to only enter admin for the password. Therefore, I had to call Linksys and their tech was stuck as well as asked me to return for a new one. I eventually figured this out myself, got into the web based setup and uploaded the V207 firmware. Guess what, same issue! I was able to configure with the V212 setup program from the CD and I put the bridge into use. Linksys called me today on Sunday (5/27/07) and said they figured out the user name had to be "admin". They also told me the V3.1 hardware is usually just sold to the UK and had me download it from there (V2.03). This corrected the WEP configuration issue and all is working fine now.

Pros: None

Cons: Will not stay connected. Constantly having to reboot units to keep bridge up.

Overall Review: After changing channels, security settings, everything, the units "disappear". I have two of these "beauties" installed as a transparent bridge to connect a pump house to an internet connection to simplify my life. Turns out, I lose connectivity and have to drive out there, power cycle the units, and after testing everything for an hour, I drive home and either unit A or unit B has completely shut off. No new firmware and horrible Linksys technical support - "sir, just press the button on the back of the unit" - Absolute GARBAGE!!! - buy a dedicated wireless bridge from wlanparts.com if you are EVER thinking of using the WET54G for more than a paper weight!!!!!