Phanteks Polar ST4 CPU Air Cooler, 4 Direct Heat pipe, M25 120mm D-RGB fan, Intel LGA 1851/1700/1200, AMD AM5/AM4 Compatible - Black
- $69.00
- Free Shipping from China
Sold and Shipped by OM
Because this item is priced lower than the suggested manufacturer’s advertised price, pricing for this item can be shown by proceeding through the checkout process if the product is available.
Simple, short-term installments
Check out securely with PayPal and choose Pay Later
- Pay in 4 is available upon approval for purchases of $30-$600.
- Pay in 4 is not currently available to residents of Georgia, New Mexico, North Dakota, Missouri, South Dakota, Wisconsin, or any U.S. Territories. Offer availability also depends on the merchant.
- Late fees may apply for missed payments depending on your state of residency.
- When applying, a soft credit check may be needed, but will not affect your credit score.
- You must be of legal age in your U.S. state of residence to use Pay in 4.
- Loans to California residents are made or arranged pursuant to a California Finance Lenders Law license.
Seller
right14 Reviews (86% Positive)
Reviews(248)
Black Heatsinks
Cools great
PWM Control
Very quiet even on full load
Rubber isolated mounts
Fits in my Corsair 300R Windowed Case
The mounting screws for the heatsink to the motherboard have a maximum tightness set. This prevents over tightening and possible damage as well as ensure the most efficient connectivity the CPU.
i7-4770K @ 4.4 GHz Vcore @1.248 volts
Idle: 80-85 °F
Load: 170 °F (AIDA64 Stability Test - 10 minutes)
The white border on the fans would look better in black.
The fans should really be PWM fans and not use a weird splitter to a PWM cable. This creates extra clutter in my system with more cables that also don't match being white in color.
The metal mounts for the fans (This could just be me) were quite difficult to get into the mounts onto the fans without bending them excessively.
The method used for screwing the heatsink to the motherboard isn't the greatest. It would be better if they reversed the design, instead of the male end of the screw on the motherboard mount put that on the mount on the heatsink and the female end on the motherboard mounting end. This would make it a lot easier to line up and screw in especially because this cooler is huge and there isn’t a lot of room in between the towers.
My G.Skill Ripjaw ram did not fit. The front fan would sit on the rams heatsinks and cause the side panel to not fit. After getting some low profile ram everything fit perfectly.
Also I did not use the massive amount of thermal paste included, I used Artic MX-4.
Has a LOT of cooling potential, high performance air cooling is a wonderful thing.
Mine arrived broken in two ways:
The top of the heatsink was damaged so the top panel would fall off. Also, the baseplate was slightly bent so I couldn't mount the cooler without fear of breaking my mobo (the mounting screws were too high to drop the plate). It seems to be quite fragile, so be careful.
I wish it had worked out, I had high hopes for it. Also note that you will have trouble with tall RAM.
Warranty & Returns
Warranty
Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
Return Policies
Return for refund within: 30 days
Return for replacement within: 30 days
This item is covered by OM Return Policy
Manufacturer Contact Info
For a directory of all our manufacturers, please click below.
Features & Details
- Four High quality sintered powder copper heat pipes
- High performance DRGB/ARGB fan M25-120 fans with wide RPM range
- Sleek design that fits on any motherboard without RAM issues
- Direct CPU contact for optimal performance with a cost-effective design
Specifications
| Brand | Phanteks |
|---|---|
| Model | Polar ST4 |
| Part Number | PH-TC12ST4_DBK01 |
| Color | Black |
|---|---|
| Type | Fan & Heatsinks |
| Fan Size | 120mm |
| CPU Socket Compatibility | AMD Socket AM4 / AMD Socket AM5 / Intel LGA 1150 / Intel LGA 1151 / Intel LGA 1155 / Intel LGA 1156 / Intel LGA 1200 / Intel LGA 1700 / Intel LGA 1851 |
| Bearing Type | Hydraulic Bearing |
| TDP | 235W |
| RPM | 400~2000 +/- 10% RPM |
| Air Flow | 84.26 CFM |
| Noise Level | 35.7 dBA |
| Power Connector | 4 Pin |
| Pressure | 2.67mm H2O |
| LED | RGB |
| Heatsink Material | Aluminum & Copper |
| Max CPU Cooler Height | 154.5 mm |
|---|---|
| Fan Dimensions | 120 x 120 x 25 mm |
| Heatsink Dimensions | 120 x 50 x 154.5 mm |
| Weight | 1.6 lbs. |
| Package Contents | 1 x Polar ST4-120 heatsink 1 x M25-120 D-RGB Fan 1 x Mounting hardware for all listed sockets 1 x Low noise adapter 1 x PH-NDC thermal compound 1 x Thermal paste spreader 1 x Installation guide 1 x Intel back plate (ABS Plastic) for LGA115X/1200/1700 4 x Fan wire clips 2 x Universal socket bracket 4 x stand-off for LGA1200/AM4/AM5 4 x stand-off for LGA1700 4 x AMD AM4/AM5 screws 4 x Intel LGA115X/1200/1700 screws |
|---|
| First Listed on Newegg | July 19, 2025 |
|---|