SYBA SD-ADA50016 SATA II to IDE ATA133 Bi-directional Adapter

Reviews(192)

3.9
TOP FAVORABLE REVIEW
Worked perfect...once I figured out what I did wrong

Worked perfect...allowed me to connect my old IDE hard drive to a SATA on my MB with no issues. May buy another to use with other IDE drives I have laying around since I have so many open SATA ports.

None so far, other than having to troubleshoot a bit.

When I first plugged everything in my PC hung on POST for like 30 seconds and then finally entered BIOS. Once there, I saw the drive wasn't detected. Dang. So turned it off, looked at the instructions and noticed there are two little switches underneath the SATA ports on the adapter. You need to make sure those switches match up to the HD jumper based on the instructions (Master, Slave, CS). It's confusing, because it looks like you only need to set those if you're plugging into an IDE port on the MB...which is not the case. Once I set both the HD and adapter to Master, it POSTed immediately and let me into the BIOS where the drive was detected just fine. Made some adjustments in boot order (so it'd treat this as a secondary drive) and the thing booted right into Windows. Formatted the drive and all is well. Performance is actually really good as well. Couldn't be happier!

View MoreView Less
VS
TOP CRITICAL REVIEW
Won't work with HP6300 Pro with Secure Boot Feature

Works with non-secure boot computer.

HP 6300 Pro with Secure Boot feature will not boot when adapter is attached to IDE ODD and motherboard SATA port. Contacted Syba customer support but they could not solve the problem. Problem may be the adapter is not a registered component for secure boot computers.

Would not recommend for secure boot (Windows 8) computers.

View MoreView Less

Warranty & Returns

Warranty

Limited Warranty period(parts): 1 year

Limited Warranty period(labor): 1 year

Read full details

Return Policies

This item is covered by Newegg.com's 45/1 Return Policy

Manufacturer Contact Info

Specifications

Model
BrandSYBA
ModelSD-ADA50016
Details
ColorBlack
Changer TypeSATA to IDE
SpecificationsUnique Bi-directional SATA to IDE Converter Chipset: Satalink Spif223a Supports 3.5-inch SATA and IDE (ATA) Hard Drive Supports 5.25-inch SATA and IDE (ATA) Optical Drives LED Indicators: Power-On and HDD-Activity Ultra Low Power Consumption Connectors: IDE (ATA) SATA to Computer (Yellow) SATA to Drive (Black) 4-pin FDD Power ConnectorTwo Independent Ultra ATA Channels with 128/256 Bytes Buffer Per Channel Driverless Installation Serial ATA Interface: Complies with SATA 1.0a Specification Supports SATA Generation 1 with Transfer Rate up to 1.5Gbps (150MB/s) Supports Spread Spectrum in Receiver Supports SATA Power Saving Mode (Partial and Slumber) IDE (ATA) Interface: Complies with ATA Specification Complies with Ultra ATA 133 with Transfer Rate Up To 133MB/s Supports PIO Mode o, 1, 2, 3, 4, 5, 6 Supports MDMA Mode 0, 1, 2 Supports Ultra DMA Mode 0, 1, 2, 3, 4, 5, 6 Supports Master/Slave/Cable Select Mode by Configuration Switches 40 Pin IDE interface
Connectors
Connector A1 x SATA host (Yellow) 1 x SATA device (Black)
Connector B1 x 40-pin IDE (ATA)
Features
FeaturesUnique bi-directional SATA - IDE converter Supports 3.5-inch SATA and IDE (ATA) hard drive Supports 5.25-inch SATA and IDE (ATA) optical drives Power-On and HDD-Activity LED indicators Ultra low power consumption Two independent Ultra ATA channels with 128/256 bytes buffer per channel Driverless. No driver is needed Serial ATA Interface Complies with SATA 1.0a specification Supports SATA Generation 1 with transfer rate up to 1.5Gbps (150MB/s) Supports Spread Spectrum in receiver Supports SATA power saving mode: Partial and Slumber IDE (ATA) Interface Complies with ATA Specification Complies with Ultra ATA 133 with transfer rate up to 133MB/s Supports PIO mode o, 1, 2, 3, 4, 5, 6, MDMA mode 0, 1, 2 and Ultra DMA mode 0, 1, 2, 3, 4, 5, 6 Supports Master/Slave/Cable Select mode by configuration switches
Dimensions & Weight
Dimensions2.40" x 6.20" x 6.80"
Weight0.15 lb.
Package Contents
Package Contents1 x SATA to IDE (IDE to SATA) Bi-Directional adapter 1 x Small and big 4-pin power extension Y-cable & SATA Cable
Additional Information
First Listed on NeweggAugust 10, 2009
View Moreexpand_moreView Lessexpand_less

Overview

Overview